SMC Discussion Areas
November 27, 2024, 12:02:46 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Bottle rack  (Read 3787 times)
0 Members and 1 Guest are viewing this topic.
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« on: August 16, 2005, 10:32:53 am »

Hello

My ebay purchased empty bottle rack arrived yesterday. The rack is about 3 to 4 feet tall. The top of the rack has two metal extensions with loops. So do you drilling into the top of the machine & hang the rack?

Now my V-126 the machine I bought the rack for has about 6 holes down the left side of the machine from an old bottle rack. Of course these holes do not line up with the new rack

I guess I am looking for ideas beside putting another hole in the top of the machine.

Kevin




Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« Reply #1 on: August 17, 2005, 11:07:08 am »

Hello

I guess from the lack of response that I will need to place two hooks in the top of the V-126 to hold the empty bottle rack in place.

Kevin
Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: August 17, 2005, 11:38:36 am »

Kevin, why not cut the loops off? You don't want any more holes in your machine do you?
        I hang my empties rack on the wall next to my machine.
        Terry, I got six of these racks back from powdercoating if you still need one.
Logged

Glen
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« Reply #3 on: August 17, 2005, 02:10:22 pm »

Moondawg

Now that is an idea I need to look at. If I cut the loops off will the metal studs fit the existing holes in the side of the machine or just mount it to the wall & be done with it.

Thanks

Kevin
Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
Guest
« Reply #4 on: August 17, 2005, 02:50:01 pm »

I like the idea of the wall mount or using the existing holes.  I hate to put extra holes in my machines.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!