SMC Discussion Areas
November 27, 2024, 09:53:38 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Westinghouse problem  (Read 3993 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: May 16, 2005, 10:13:44 pm »

I have a Westinghouse WD-60-K6-D that is having a refrigeration problem and I could use some help.  The compressor will kick-in and cool for about 30 seconds and then stop.  The area around the coils is cool (the arear at the top by the bottles is still warm) the coils appear to have frost on them and are cool to the touch.  I can adjust the thermostat and get the compressor to kick-in again, but then it will shut-off again after a short time.  I could use any help you could give as to where and how to trouble shoot this problem.  Thanks in advance for helping an newbie!
Logged
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« Reply #1 on: May 17, 2005, 08:38:46 am »

Hello

Are the two fan motors running?

Kevin
Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: May 17, 2005, 11:14:33 am »

If so, the cross the two thermostat wires together and see if it stays running and frosts the coils
Logged

Glen
Guest
« Reply #3 on: May 17, 2005, 09:44:35 pm »

Thank you MoonDawg and Kevin for the responses!
First question:  Two fan motors?  The fan by the compressor at the bottom of the box is running!  Where should I look for the second fan/motor?
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!