Anyone need vendo 63 parts?

[Bob K]

I picked up a Vendo H63 last night.  Very solid complete machine, but suffered some damage due to a break-in '>

I'm thinking of parting it out.  Is anybody in need of anything if I decide to go that route?

I haven't fired it up since I transported it on its back, but reefer, bottle door, stack, shelves, liner, gasket, etc. all look really nice.

Bob

[dr galaga]

What kind of sign does it have and what shape is it in?

I am also interested in the round piece that the lock screws in to (that spins to move the locking bars) - see attached pic.

[Bob K]

dr G,
It's the metal sign, not a light-up.  

I'll look at the lock piece.

Bob

[joesquid]

Bob,
Have you still got the cap catcher and bottle opener bezel, and coin return bezel?

Thanks!

[joesquid]

Bob,
One other thing.  Do the chrome-like moulding pieces on the main door come off and are yours in decent shape?

[Bob K]

joesquid, it has the capcatcher and coin return bezel, but the opener bezel is crunched.  Strangely enough, it does not have metal trim around the front - nor does it look like it ever did.  Must have been a budget model :'>

Dr G., it does have the lock piece in your illustration.

Bob

[joesquid]

Bob,
How much do you want for the cap catcher and coin return bezel?

[BryanH]

Eric - don't know if you still need the CR bezel.  If you do there's one on ebay.  I bought the same on for my vmc56 and it was in great shape (NOS).

[jasmine64]

Does your machine have the 9 pin female jones plug that the coin mech plugs into?  
I can use one.

[dr galaga]

Thanks Bob, I got the part today.  I key all of my gameroom items the same, but the hole that is used in the piece that Bob sent me is too small for modern cam locks.  I wanted to keep the original one with the original lock, sooooo I filed the hole bigger in the one that I got today (didn't have any Dremel bits that were small enough).  
My Vendo is now keyed the same as my games!