Ideal 55 Squirt Update

[Rebel]

Question on side door lock..The 55 Squirt machine I have does not have any way to bolt L bracket with nut to liner.There are no screw holes in liner for bracket. Only those for shelf. When I picked machine up, the door was wired shut with wire running from door bolt to shelf screw. Am I missing something here ? Want to install L bracket but am afraid to drill liner for screws. How was this side door locked when liner was never drilled for bracket ?

[Slapshot42]

The “L “ bracket lock fastens with (2) carriage bolts to the pre cool shelf.  There are NO holes drilled in the main liner.

http://soda-machines.com/discussions/index.php/topic,21675.0.html

[Rebel]

Slapshot...thanks for info.

[Rebel]

The “L “ bracket lock fastens with (2) carriage bolts to the pre cool shelf.  There are NO holes drilled in the main liner.

http://soda-machines.com/discussions/index.php/topic,21675.0.html

Guess I'll see all this when shelf and bracket arrive. Looking at pic above the brackets two bolt holes are on side...same side that goes against liner. Just dont see how it attaches to shelf. Guess I will and will look like an idiot for asking.lol

[Slapshot42]

When you get the shelf it hopefully make sense !!

[Rebel]

Am sure it will. Do appreciate.

[Rebel]

When you get the shelf it hopefully make sense !!

SliderBob sent pics today and now understand L bracket and how it attaches to shelf.
Had no idea there was a piece of angle on bottom left side for L bracket.

[Rebel]

All seems to be running well. Got new stat in today and ran it a few hours. Cycling every 15 minutes. Cut in on 1st setting was 44° and cut out at 35°. #2 setting cut in about 42° and cut out at 33°. Thats with no rack installed yet.
That seem about right to you guys ?

[cohammer]

Sounds good to me , I think my 35 was in at 40 and out at 31 , but not sure hw accurate the thermometer is .

[Rebel]

Sounds good to me. We'll see how well it does after installing rack. Thanks for reply.