V 63 8 Oz coke bottles

[goob]

HI thanks for all the prior help. Will the 8 Oz bottles of coke work in this machine? I have tried and it looks like they are to small diameter.  I adjusted the shelf to the highest of the three holes in the stack, and it still won't vend.  If I put bigger bottles on that shelf, all is good.  Thanks!

[halehouse]

They should. I use them in mine.

I’m not sure what you mean by too small diameter? I’ve had bottles that are too large of a diameter, but not too small.

[goob]

Thanks will have to try them in a different shelf.  The 8 oz glass bottles that I bought are much smaller than even the the plastic ones. I will have to get my manual out for the art name, but the bottles roll under the bar that resets th gate, so it stays locked.

[johnieG]

Hmm....I own a V63 & VF56 & never has trouble with the new style bottles, only in machines with vertical columns stacks like a V44, V80, etc.


Raise the floor of the bottle port(s) there are holes & rods that will either raise or lower the "floor" of the vending port(s) in relation to the gate/roller for that selection/shelf  the larger the bottles diameter, the lower the "floor" needs to be (and visa versa)

some of the ports however have a threaded rod & a lock-nut holding them in place because these are the "keystone" positions that hold the rack together, they can be adjusted also, but only do one at a time or your rack may fall apart...  

there's usually an instruction label on the inside of the door to show how to adjust the shelves & ports for varius sized bottles.

[cohammer]

I use them in my C96

[goob]

I raised the floor rod to the highest hole, and that didn't help.  Looks like I will have to try them in different slots.  Might be something wrong with that row.

[goob]

Here is a better explanation. On the top shelf, I have the small bottles, all other shelves work.  The gate is angled to the back of the case, and if I pull it forward with my fibers it will let a bottle come out after ya put your quarters in. When you pull the bottle out, the new bottle is small enough to go under the bock in bar. I thought that was the problem.  In looking at the manual diagram, I think a sing probably at the back of the stack may have broken, or maybe there is something wrong  with the gate lever. Gonna have to find time to pull the stack.  Good thing 6 shelves still work!!!

[goob]

I moved the bottles to different vending ports, moved the shelf floors up to the highest of the tree holes and still have problems with the 8 oz glass bottles, but none other.  The gate does not return forward and looks like the bottles roll under the gate bar.  So I think per the manual, maybe too much tension on the lock spring, but that doesn't make sense because all other bottle sizes work, or maybe the whole stack needs to be pulled, cleaned and greased.  That will be a project when the weather gets a little worse out.