SMC Discussion Areas
November 26, 2024, 10:08:06 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Question for the refrigeration gurus  (Read 3548 times)
0 Members and 1 Guest are viewing this topic.
BrianS
Soda Jerks
*****
Offline Offline

Posts: 731



« on: April 16, 2019, 10:44:41 pm »

I recently helped a friend refurbish his 81 that had been sitting for a number of years.  Got it cleaned up, rewired, and running.  Ran fine for about a month then stopped cooling.  He found the line entering the evaporator frozen up and the cabinet warm.  Let it sit for about a week and turned it back on to see if it would do it again so he could take a picture.  When he did this, it came on, cooled, cycled, and appeared to work normally.  Any explanation?  I am guessing possible sccale inside the lines that may have created a blockage in the lines, but that is only a guess.  Any input as to the possible cause and more importantly, a possible way to prevent this from killing the compressor?
« Last Edit: April 18, 2019, 05:14:17 pm by johnieG » Logged

Brian

Vendo 56 - restored
Vendo 81 - in progress
Vendo 39 - in the rough
Rockola 1428 - Original
1959 Williams Pinch Hitter
Wurlitzer 1400
1930 Koken Barber Pole
SodaShopNick
Soda Jerks
*****
Offline Offline

Posts: 688


« Reply #1 on: April 17, 2019, 08:36:01 am »

No expert here, but I know they will chime in.  Seems like there is a small hole somewhere in the line that lets moisture in.  Over time that freezes and blocks the line and it stops cooling.  Unplug it and let it sit and that area thaws back out and it starts to cool again, but again at some time it will freeze up again.   Not a technical answer, but my thoughts as I have had this happen to me.  I took mine to a member on this forum and they found a leak, sealed it, recharged it and I was good to go. 
Logged
BrianS
Soda Jerks
*****
Offline Offline

Posts: 731



« Reply #2 on: April 17, 2019, 09:29:34 pm »

That actually sounds like a very logical answer. I look forward to some additional thoughts on if this is the most likely cause, and if so, is it something that can be found fairly easily by someone with the right knowledge or will this be a difficult fix
Logged

Brian

Vendo 56 - restored
Vendo 81 - in progress
Vendo 39 - in the rough
Rockola 1428 - Original
1959 Williams Pinch Hitter
Wurlitzer 1400
1930 Koken Barber Pole
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #3 on: April 18, 2019, 10:59:41 am »

  Seems like there is a small hole somewhere in the line that lets moisture in. 

      If the system had even the smallest hole, the pressure inside would deplete all your freon and there would not be any cooling period. But Nick is right,
I'm not sure how, but moisture sometimes accumulates inside these closed systems and when subject to freezing temperatures will turn to little drops of ice.
Take the unit out and have a service technician remove the freon and either strain it or replace it.
Logged

Glen
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!