SMC Discussion Areas
November 23, 2024, 10:48:55 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Refrigeration (Moderators: johnieG, Jim) > Vendo 39 condensing unit
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Vendo 39 condensing unit  (Read 5468 times)
0 Members and 1 Guest are viewing this topic.
Hrdestiny
Newbie
*
Offline Offline

Posts: 39
« on: January 19, 2017, 04:06:12 pm »
I have a vendo 39 with a condensing unit where the condenser coil and fan are mounted on top of the compressor and face out the back of the machine.  My question is should the condenser fan be drawing air in or blowing it out on this setup. Thanks for any help.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: January 19, 2017, 05:44:16 pm »
It should draw fresh air in through the condensor first, then blow over the compressor.

So, yes... "in"  the condensor first.
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Hrdestiny
Newbie
*
Offline Offline

Posts: 39
« Reply #2 on: January 19, 2017, 05:51:15 pm »
Thanks for the reply. Its currently blowing out through the condenser coil. Whoever had it before must of set it up wrong. I'll see about changing it.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #3 on: January 19, 2017, 10:16:16 pm »
Must have installed a "borrowed" fan/ motor assembly out of some other machine, or it just has the wrong rotation on the motor.  Or conversely the wrong fan.

Have fun
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Windows
Newbie
*
Offline Offline

Posts: 13
« Reply #4 on: January 23, 2017, 09:49:31 pm »
What if the fan blade was on backwards ?
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #5 on: January 24, 2017, 10:49:55 pm »
Quote from: Windows on January 23, 2017, 09:49:31 pm
What if the fan blade was on backwards ?

backwards fan blades, or the wrong blade pitch or the wrong  motor rotation will just "bat" the air around , lots of air movement going round-robin around the blades, but very poor to no linear flow through the condenser coils.

You must match the fan-blades pitch (rotational direction) with the motor's (clock-wise for clock-wise & vice-versa)
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!