SMC Discussion Areas
November 23, 2024, 05:36:55 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Refrigeration (Moderators: johnieG, Jim) > ideal 55 service ports?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: ideal 55 service ports?  (Read 6421 times)
0 Members and 1 Guest are viewing this topic.
jtoenges
Newbie
*
Offline Offline

Posts: 7
« on: December 17, 2014, 12:50:09 pm »
I have read previous posts on Ideal 55s and have some questions on the cooling system. My present project has a cooling system that works before I tore the machine down to have it refinished. I would like to know the following if I could.

I am refinishing my Ideal 55 cooling system.  It is a 1/4hp tecumseh compressor.  I have read previous posts talking about Ideal 55's having service ports to recharge  the system.  I don't know what these are or where to find them.  I was hoping all I had to do is recharge the system but don't know how to do it

  Do these systems need to have a dryer added?  I know they have some sort of filter already on them but do you recommend adding a dryer?  What kind and where would you put a dryer?

Is there a way to keep the copper coils in close contact with the galvanized inner tub? 

Will freeze12 be a good refrigerant?  How much does an Ideal 55 need?
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared
« Reply #1 on: December 18, 2014, 10:53:33 am »
Check with Kbareit he is the resident expert on the Slider cooling systems!
« Last Edit: December 18, 2014, 10:55:44 am by Slapshot42 » Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #2 on: December 18, 2014, 12:25:22 pm »
Pass...
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
MaineT
Soda Jerks
*****
Offline Offline

Posts: 1675
« Reply #3 on: December 18, 2014, 12:36:27 pm »
Pass...
Logged
Tim
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared
« Reply #4 on: December 19, 2014, 11:33:46 am »
Quote from: johnieG on December 18, 2014, 12:25:22 pm
Pass...

Or Johnnie G is a great resource!!  Sorry Johnnie forgot to include you in this thread!
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #5 on: December 20, 2014, 10:12:17 am »
no problem, I'm way back-logged, so I just don't have the time to play "paint by the numbers" (refrigeration repair & reassembly step by step) with a newbie at this point.

Very nice machine by the way.
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared
« Reply #6 on: December 20, 2014, 01:13:35 pm »
Quote from: johnieG on December 20, 2014, 10:12:17 am
no problem, I'm way back-logged, so I just don't have the time to play "paint by the numbers" (refrigeration repair & reassembly step by step) with a newbie at this point.

Very nice machine by the way.

The nice thing about other members that may have the time!
Logged
Sarman47
25 Cent Member
****
Offline Offline

Posts: 273
« Reply #7 on: December 20, 2014, 05:50:12 pm »
Maybe Eric at Global Compressors might be able to give you a little help.

http://globalcompressors.com/contactdirections.html

Did a great job for me on a Cavalier C-55-E compressor.

Jeff
Logged
Cavalier C1-55D
Cavalier C2-55E    
Westinghouse WB126-B6-D (daily driver)
Vendo 39
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227
« Reply #8 on: December 20, 2014, 06:16:16 pm »
   If you removed the liner, coils, floor pan and compressor through the top, you just clean up the compressor and re-install the same way. No need to change freon in a working system.
      If you broke the fitting loose on the copper line at the compressor base already, then you have found the service port too.
Logged
Glen
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!