|
MoonDawg
|
 |
« Reply #30 on: March 09, 2005, 04:11:39 pm » |
|
Sorry.
I learned something today. Am re-assembling this Pepsi 110 the guy had taken apart. As stated in an earlier post, the perimiter of the door and body is lined with wood.
So the old holes in the wood are now too big. Bought some plastic inserts you use to screw into drywall and hammered them into the old holes. Nice tight fit. 
|
|
|
|
|
Logged
|
Glen
|
|
|
|
Kevin C
|
|
« Reply #31 on: March 09, 2005, 09:18:10 pm » |
|
Hello
I checked the lower post & they are part of the case. So I will have to cut them off. The other post off the second slug rejector does fit the screw in holes.
I am still not sure if it is the correct rejector so I am bidding on a lot of them on ebay.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Creighton
|
|
« Reply #32 on: March 09, 2005, 11:44:54 pm » |
|
Kevin,
They aren't the "exact" rejector but either one should work. Course you will need to cut off the the nickle part to get that one to fit /cut the bottom lugs etc. See my earlier post. Lots of work when correct Nat's can be had for $20 or so.
What I've found to be more or less correct for an early RT V-56 is National 4975 (ballpark for a 110). As I undestand all the 49xx series falls into the same time period. Attached is a pic. A kind soul sent me the manual as well so let me know if you need anything.
Creighton
|
|
|
|
|
Logged
|
|
|
|
|
Kevin C
|
|
« Reply #33 on: March 22, 2005, 08:39:36 pm » |
|
Hello
How can you tell if a slug rejector is a 5 & 10 cent type or it will also take quarters? What happend in the old days when a quarter was dropped into a 10 cent machine?
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Creighton
|
|
« Reply #34 on: March 22, 2005, 10:52:05 pm » |
|
Hey Kevin,
Was wondering just today what was going on with this issue. Best I can tell is most rejectors will take and sort .25 (a quarter). If it can go anywhere of use is another issue. A picture of the top of the rachet mech. with the slug rejector removed would help to clarify. As a wild a** guess suspect the .25's will stack up if nowhere to go. The pic will help sort if there is a path for .25
Standing by...
Creighton
|
|
|
|
|
Logged
|
|
|
|
|
Jim
|
|
« Reply #35 on: March 23, 2005, 07:58:06 am » |
|
| Quote | | What happend in the old days when a quarter was dropped into a 10 cent machine? |
The coin slots are not large enough to allow a quarter to be deposited; only dimes and nickels. |
|
|
|
|
Logged
|
My six cents, Jim  |
|
|
|
Kevin C
|
|
« Reply #36 on: March 31, 2005, 05:05:46 pm » |
|
Hello
I cut off & ground down the lower pin nubs for a flush fit. I then installed the slug rejector. All is well at this point & I am feeling good. Then came the 10 cent coin test. I dropped in 2 nickels, hit the crank & the crank worked fine, the nickles stayed in the slug rejector. If I hit the coin return the nickles would fall out. So at this point my question is " What the  '> "
What am I missing here? When the coins fall through the slug rejector what is suppose to happen? Hit a trip lever to allow the crank handle to move? This is a problem that is really making me work.
Kevin C :
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
MoonDawg
|
|
« Reply #37 on: March 31, 2005, 05:29:48 pm » |
|
Test the slug rejector on a flat surface. Drop in a coin and follow it's path to see where it gets stuck. It's usually a dirty coin path that causes coin jams
|
|
|
|
|
Logged
|
Glen
|
|
|
|
Kevin C
|
|
« Reply #38 on: March 31, 2005, 05:52:42 pm » |
|
Hello
One point is that the crank handle will complete a full rotation without any money with the coin rejector installed. It seems to me that that crank handle should not be able to complete a full cycle unless the money was installed.
Kevin C
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Creighton
|
|
« Reply #39 on: March 31, 2005, 11:55:19 pm » |
|
Sounds like it is on some sort of free vend. Does it release the bottle rack and allow a pull?
2X.5 should clear the slug rejector and fall into the slot for .5 they line up before vend. A level test stand to check the slug rejector and dropping .5 into the mech direct should help sort where the problem is.
creighton
|
|
|
|
|
Logged
|
|
|
|
|
