|
Kevin C
|
 |
« on: February 18, 2005, 09:08:15 pm » |
|
Hello
Well here is my next step in this coke machine madness. I bought Vendo 110 from Josh ( loman4ec). So I now have four machines in the garage. This V110 is a large coin door machine I think and had been painted (red-white-blu) with Pepsi blue on the front. The embossed coke on the front top has been painted gold & it appears that someone had attached a sign over the embossed coke. So I will be asking all the newbe questions about the round top machines.
Right now the only question I have is about the fitting of the coin rejector into the crank handle area. I know that Josh sent me a rejector with the machine & I hope that Josh & MoonDawg can help me with this. It appears that the coin rejector is a little long to fit. Well what ever the problem is it will work out. So as soon as I practice paint my V56 I will turn my attention to this V110.
I want to say thanks to Josh for being most helpful in the shipping of this machine.
So look at my new machine!!!!!!!!!!!!!! I am fired up!!!!!!
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Kevin C
|
|
« Reply #1 on: February 18, 2005, 09:09:11 pm » |
|
Hello
Here is the picture of the front.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Jim
|
|
« Reply #2 on: February 18, 2005, 10:42:23 pm » |
|
Kevin,
The slug rejector should have two set screw studs along the sides at the bottom that will slide into a groove in the coin mech frame. There should also be two more set screw studs at the top that will latch into a spring loaded clip on each side at the top of the coin mech frame.
Can you get us a closer shot (photo) of the coin mech and the slug rejector...?
|
|
|
|
|
Logged
|
My six cents, Jim  |
|
|
|
Kevin C
|
|
« Reply #3 on: February 19, 2005, 07:48:37 am » |
|
Jim
I saw that but it appears that the rejector is about a 3/8 inch to long/tall.
Yes I will get a picture today & post. I will be in the garage all day working on the V56 paint prep.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
MoonDawg
|
|
« Reply #4 on: February 19, 2005, 01:34:28 pm » |
|
Look for different holes to move the set screws to
|
|
|
|
|
Logged
|
Glen
|
|
|
|
Kevin C
|
|
« Reply #5 on: February 19, 2005, 06:41:24 pm » |
|
Hello
Maybe I am missing something? Here is the picture of the slug regector in the vend mech. It is a littel tall.
I was out in the garage vending adult drinks today so no work was completed.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Kevin C
|
|
« Reply #6 on: February 19, 2005, 06:45:43 pm » |
|
Hello
Here is a picture of the whole rig.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Kevin C
|
|
« Reply #7 on: February 19, 2005, 06:47:27 pm » |
|
Hello
Here it is.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
MoonDawg
|
|
« Reply #8 on: February 19, 2005, 07:27:38 pm » |
|
Kevin, remove the coin chute from the slug rejector, you already have one attatched to the machine. You don't need two...........
|
|
|
|
|
Logged
|
Glen
|
|
|
|
Kevin C
|
|
« Reply #9 on: February 19, 2005, 07:37:54 pm » |
|
MoonDawg
Ok Great. I will give it a try in the am.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
