Vendo 110

[Kevin C]

Hello

Here is the lower coil after my first painting. I will paint it one more time to get the rest of the rust areas.

Kevin

[Kevin C]

Hey

One last question.

This picture shows the lower left corner of the cabinet. I have two sets of stripping on the cabinet to seal the door. There is a black rubber on the outside & then there is a brown hemp/rope weather stripping that sticks out a little further than the black rubber.  It appears that the brown stripping is not orginal.  Is the machine suppose to have both sets of stripping?

Kevin

Hi Kevin,
I'm a 110 guy too.
Mine has no hippie hemp rope. Just the stip with the rubber gasket attached and then a black plastic breaker strip (or whatever you guys have called it around here).But yes there is an old puddy blob that seals the space that joins the upper and lower compartments.

Glad you're working on it.
I love my Coke V-110, except that it is an "all red" model and I desperately want to swap it with someone for the "red & white" version.

Kevin,
We have a lot in common. I too have a Cornelius slider that I am working on.

[Kevin C]

Markito

Is your V110 operational?

I hope to have mine running in the next week. I looked at a V110 from an Ebay listing the it looks like I need to get rid of the rope seal & then install new rubber stripping. I found some on the Soda Jerk website last night.

My Cornelius can slider works well but appears to hold water down in the precool area. I have it turned off right now plus I need to figure out how to adjust the coin mech from 75 cents back to 50 cents.

Kevin

Yep, it has been up and running for about a month now. Works great and I have the free-vend trick in use. I just now updated my signature below to reflect it's move to my kitchen.

[Kevin C]

Markito

Your V110 is all red & mine is embossed with coke but painted red/white/blue Pepsi.

when I repaint I plan on making it Red/White.

Kevin