SMC Discussion Areas
November 23, 2024, 02:18:26 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vendo v-118-214-5 pepsi  (Read 6164 times)
0 Members and 1 Guest are viewing this topic.
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« on: February 15, 2005, 07:39:13 pm »

Well I stumbled onto another orphan, an 80's Vendo "flat-front" vendor model no. V-118-214/5 Pepsi vendor (lightup front) it vends 118 Bottles 12oz glass or poly-bottles (plastic) / 214 12 oz. cans according to the loading sheet. it has adjustable back spacers for single or double-width depth on the cans in the columns or to adjust for different bottle lengths.  I fixed a loose wire on the compressor & it fired right up & runs cold & quite, it came equipt with a coinco S75-9800B changer set at 55-cents, the service tag says it was last serviced in '87. I found it on a service run in the back of a former factory turn storage facility, the price ? quote " if you want it, take it out of here"  '<img'>  I think it cleaned up nicely.

it's not too big, at H-64" D-24" W-32  it weigh's in at about 255lbs. ( fork-lift scale) it only took two of us to load it off of the back of my truck & get into the "Soda-Barn" a couple of new F2 starters & the lightup shines again...so here are some pictures...what do you think?
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #1 on: February 15, 2005, 08:48:43 pm »

Nice John. Good find. I like those smaller 80's machines because like you said they will vend almost anything.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: February 15, 2005, 09:25:55 pm »

I have the exact same small machine, same nice condition with key, but compressor is bad.  $100.00 without the coin mech. Vending system works.  Pick up in So. Calif.
Logged

Glen
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #3 on: February 15, 2005, 10:34:07 pm »

Thanks! the only thing that was keeping it from working was the loose wire in the compressor's junction block, it's squeaky clean inside & the outside was just covered in factory grime, a rag & some 409 & it came clean, I'll wax it up find a plug lock I'll play with it a while & go over the workings to make sure it's at 100% & then it'll probably end up going on Ebay...

Sure is a compact little machine, ( my wife say's it's "cute" how's that for an aproval!? ) I thought maybe for under the Deck next to the pool??? (It's outdoor rated) Hmm, but I've already got my Westinghouse WC102MD vendor, & you can't keep all the strays, just gotta find them a new home!
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
DanV
5 Cent Member
**
Offline Offline

Posts: 96



« Reply #4 on: February 15, 2005, 10:54:07 pm »

Now that I have seen the new  coke 12 oz plastic bottles , these would work great for you. Once in a while I see the pepsi and dew 12 ouncers too at Wallmart.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #5 on: February 16, 2005, 09:15:03 am »

Quote (DanV @ Feb. 15 2005,10:54)
Now that I have seen the new  coke 12 oz plastic bottles , these would work great for you. Once in a while I see the pepsi and dew 12 ouncers too at Wallmart.

Thanks Dan, I've tried it with 12oz. glass & it vends those fine & even the 20oz. plastic, in fact if you look at the picture you'll see were the bottle opener used to be...& the cap/crown catcher is still in place, but it just had some of the old pull-tabs in it...no bottle caps, so it looks like a pretty flexible machine.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!