Lacrosse soda machine

[jasmine64]

I just purchased a lacrosse machine and need some info on it. model # LC546. It is a 6 bottle machine. Need lots of work and I really need to id the coin mech.

[jasmine64]

Lacrosse front pic.

[jasmine64]

I also need to know if there are manuals out there and wiring diagrams.

Every thing except the cord is intact with this machine. Even the drip pan and door glass! Coin return lever is hard to press.

Where can I get gaskets to seal the doors after cleaning the machine. I plan on taking my time with this one cleaning it up.

I want to get it running before going into having it stripped, dents filled in and painted this summer.

Who has paint codes for Pepsi and replacement decals?

[Kevin C]

Hello

Welcome.  If you stick around I am sure you will get some good information here. I would suggest taking a picture of the entire coin mechinism so the experts here can get a look at it & also post any numbers.  Plus try to make your pictures a little larger like 400 pixels by 300 pixels.

I was in you same position back in late October & now I have three machines.

Kevin

[jasmine64]

Thanks Kevin. I have plans to go over the entire machine and document all parts that I can in the next several days. Would like to document it with before and after pics. I'll remember to post larger pics next time.

[jasmine64]

This is the pics I took this morning. Can anyone tell me what kind of coin mech this is it has no id marks of manufacturer. a few numbers but other than that nothing.

[jasmine64]

I have a couple more pics to post. Comments on this coin mech is appreciated.

[jasmine64]

This is an all metal coin mech and weighs almost 5 lbs.

How do i clean it? It has lots of "gunk" in it and a nickel is stuck along the path of entry at the top.

[Kevin C]

Hello

I would think that thing could be a good fishing weight. How many prongs were on the cord?  Show a picture of the coin changer in the machine. I think on of the standard coinco's should work.

I just purchased three of them on e-bay for $51.

Kevin

[KreKol]

I put a Mars 6200 in my La Crosse.  It is a good replacement for the older coincos (9800s).  The only problem I have run into is the coin shoot is a little short and coins can sometimes miss the changer and land in the bottle cap catcher.  Nothing a short piece of metal will fix.