|
johnieG
|
 |
« on: January 23, 2005, 10:09:36 pm » |
|
Thought I'd drop a note for those of you who are interested, a hobby turned into a bad habit! I'm now set up to repair Coinco Electronic coinmechs, specifically the CoinCo S-75-9800 A/B series including 24-volt models & earlier 9800/A "conversions" I've entered my Name into the "restorers" listing...  :'> , after seeing my bench testing setup & repair station for my Coinmech's, my younger brother suggested that I might "hang a shingle" out for those of you in need of repairs, so hey, why not, I said? drop me a line if you have a "sick" Coinco 9800 series mech. I might be able to help...thanks, & we'll leave "the bench light on for you"
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
loman4ec
|
|
« Reply #1 on: January 24, 2005, 12:05:39 am » |
|
How much for a repair? I have 7 or 8 inop coin mechs laying around.
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #2 on: January 24, 2005, 06:45:45 am » |
|
| Quote (loman4ec @ Jan. 24 2005,12:05) | | How much for a repair? I have 7 or 8 inop coin mechs laying around. |
It, really depends whats defective on them, but I'd estimate a flat $20.00/per 'mech. +parts,& shipping both ways. (shipping is less than $10 roundtrip, per 'mech. from what UPS charges/ground +your Box) the 'mechs must be completed, (Or, if just the electronic/main body isn't working, you can ship it to me minus the slug rejector, if it's missing.) inoperable OR you can ship me the lot, & I'll repair as many as are fixable, using your defective unrepairable 'mechs as "organ-doners"
I'll tear them down, see what's repairable, clean the coin-paths & adjust the switches, and check for correct coin/pricing acception & change function.
Be aware that 'mechs are from the wonderful world of vending machines & were quite often "jury-riged" to accept all coins and/or bottlecaps, (so the vending tech won't have a call-back) & many slug rejectors as I've seen many of them are quite butchered & duct-taped back together, I can test your 'mechs with my own good slug rejectors, but you should really include them when you ship the units to me..
so lets see what you got... :'> |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
MoonDawg
|
|
« Reply #3 on: January 24, 2005, 12:06:24 pm » |
|
I've got a half dozen or so I'll ship you too. I also have some Mars 6200 mech.s. Should I send you those too? Where do we send them to? Glen.
|
|
|
|
|
Logged
|
Glen
|
|
|
|
Guest
|
|
« Reply #4 on: January 24, 2005, 12:15:01 pm » |
|
johnieG,
A quick question...
I got a CoinCo S-75-9800 on eBay a couple weeks ago. I have had it running for about 10 days and It works beautifully.
But here's the thing: It smells very smoky. Almost like cigar smoke, but if it were just that, it would have aired out by now. Do they all smell smoky? Do you think I have a defective/dangerous coin mech? Should I be concerned?
Thanks,
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #5 on: January 24, 2005, 03:27:26 pm » |
|
| Quote (MoonDawg @ Jan. 24 2005,12:06) | | I've got a half dozen or so I'll ship you too. I also have some Mars 6200 mech.s. Should I send you those too? Where do we send them to? Glen. |
I'm not set up for the MARS 'mechs yet..soon,
you can send the coinco's to me at
JohnieG c/o The Soda Barn ( Yes there is a real "Soda Barn" in my backyard , my then 4 year old son named it :'> )
12415 Buggy Whip Ct. Davisburg, MI. 48350
also note that your own coinmechs will be returned to you, I tag & inventory all mechs to their respective owners. |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #6 on: January 24, 2005, 03:33:10 pm » |
|
| Quote (Markito @ Jan. 24 2005,12:15) | johnieG,
A quick question...
I got a CoinCo S-75-9800 on eBay a couple weeks ago. I have had it running for about 10 days and It works beautifully.
But here's the thing: It smells very smoky. Almost like cigar smoke, but if it were just that, it would have aired out by now. Do they all smell smoky? Do you think I have a defective/dangerous coin mech? Should I be concerned?
Thanks, |
Hopefully it's just a ligering odor from a smoky break room machine! ( worst-case scenario would be a hot power supply Zener diode get ready to blow) A Lot of the Coinmech I have came out of some good old GM/Chevy/Buick factory's you ought to get a "whiff" of them! they smell like an ashtray! & are flithy inside with soot & crud, but if they are completely disasembled & cleaned the majority of the odor leaves with the "crud". hope this helps you out...  '> |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
sodaworks
|
|
« Reply #7 on: January 24, 2005, 11:59:14 pm » |
|
What kind of turn around time on having a coinco mech. restored? Thanks Terry
|
|
|
|
|
Logged
|
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
|
|
|
|
johnieG
|
|
« Reply #8 on: January 25, 2005, 07:09:30 am » |
|
| Quote (sodaworks @ Jan. 24 2005,11:59) | | What kind of turn around time on having a coinco mech. restored? Thanks Terry |
"Repaired" would be a better word, I can usally get a Mech up & running in about 4 days + shipping time. ( providing the circut board isn't a total piece of burnt toast & it's otherwise complete, ie;not missing parts off of the slug-rejector/and or its case,) as I have a limited supply of replacement parts, remember, these are obsolete 20+ year old units & coinco doesn't offer any support for them , let alone parts.
:'> |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
loman4ec
|
|
« Reply #9 on: January 25, 2005, 10:23:45 am » |
|
John I need some time to save some money but I am interested in sending you some of my mechs. I think they are all complete, but I know that some will be beyond repair so what isn't able to be fixed you can keep for spare parts. I am going to be sending the rest of your parts for the Vendo 56 out in an hour or so.
|
|
|
|
|
Logged
|
|
|
|
|
MoonDawg
|
|
« Reply #10 on: January 25, 2005, 10:25:36 am » |
|
Johnie, do you have enough of your own mech.s to offer an exchange service? If I send you a complete servicable mech, I really don't care if that's the one I get back.
|
|
|
|
|
Logged
|
Glen
|
|
|
|
johnieG
|
|
« Reply #11 on: January 25, 2005, 04:40:49 pm » |
|
| Quote (MoonDawg @ Jan. 25 2005,10:25) | | Johnie, do you have enough of your own mech.s to offer an exchange service? If I send you a complete servicable mech, I really don't care if that's the one I get back. |
Hmm, I haven't considered an exchange program yet, something we could possibly work out, ( it would depend on the condition of the mechs sent to me) I've gone through a box of swap-meet mech's I picked up over the last weekend & So far I've got Three Coinco S-75-9800/A models, & Two Coinco S-75-9800/B models ready to go, I also have an S75-9400/A (simular to the S75-9800/A series, able to be set for 5-cents up to & 75-cents/Vend,but it gives back Dimes & Nickles as change) & a couple of die-cast metal Coinco's too.
Oh! and I'm now setup with Paypal, (Yes it's a pain, but also a convenience for many, the value for me is it cuts down on "pay-day" delay in shipping out Items back to the customer.
If you like I can evaluate the condition of your mechs first & we can go from there.... |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #12 on: January 25, 2005, 04:46:03 pm » |
|
| Quote (loman4ec @ Jan. 25 2005,10:23) | | John I need some time to save some money but I am interested in sending you some of my mechs. I think they are all complete, but I know that some will be beyond repair so what isn't able to be fixed you can keep for spare parts. I am going to be sending the rest of your parts for the Vendo 56 out in an hour or so. |
No problem,I'll see what you got & go from there Josh... |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
joesquid
|
|
« Reply #13 on: February 02, 2005, 10:08:34 pm » |
|
Did you create your own troubleshooting board or did you find one of the old 9800 series bench testers? I've been looking forever to find one in order to repair my own mechs!
|
|
|
|
|
Logged
|
Eric "Joe Squid" Johnson
1955 Vendo 23 - awaiting restoration
1959 Westinghouse WC-44SK - awaiting parts
1967 Cavalier CS-64G - functional in house
1969 Vendo 63 - in restoration
|
|
|
|
johnieG
|
|
« Reply #14 on: February 03, 2005, 08:12:30 am » |
|
| Quote (joesquid @ Feb. 02 2005,10:08) | | Did you create your own troubleshooting board or did you find one of the old 9800 series bench testers? I've been looking forever to find one in order to repair my own mechs! |
Yep! I've got the bench tester ( had to pry it out of the cold dead hands of a local vending tech...so to speak  ) & I've pretty much reverse-engineered the circut boards & have a working schematic of the little buggers... |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Guest
|
|
« Reply #15 on: February 04, 2005, 01:07:53 am » |
|
I dont need one fixed But Im glad someone has figured it out so there is SOMEONE who can do it. I want a 50's CRT tube repaired( re Gunned) if It was the 60's I could have gotten it done cheap, Now the price scares me and I would have to ship it. GEESE
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #16 on: February 09, 2005, 08:26:38 pm » |
|
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Kevin C
|
|
« Reply #17 on: February 09, 2005, 09:22:10 pm » |
|
Hello
I just bought a lot of 3 changers on ebay & I am waiting for them to arrive. I will then have 6 total conco changers plus 1 Vendo vari price 50 I would like to send them up 2 at a time for check out/repair. What will the turn around time be?
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
johnieG
|
|
« Reply #18 on: February 10, 2005, 09:41:54 am » |
|
| Quote (Kevin C @ Feb. 09 2005,9:22) | Hello
I just bought a lot of 3 changers on ebay & I am waiting for them to arrive. I will then have 6 total conco changers plus 1 Vendo vari price 50 I would like to send them up 2 at a time for check out/repair. What will the turn around time be?
Kevin |
it depends on what's wrong with, them, but usually about 4-5 business days. go over them & make sure they are complete, if some of them are not , you may wish to send them along as "organ-doners"
I find the hardest thing to repair ( due to lack of replacement parts) are burned out CREMS ( I usually just have to remove & bypass them) & busted coin switches (when the "whisker" wire that detects the coin passing by is broken off) not to mention changer motors that are jammed & broken....
as for the Vari-price, you can send it along with the others & I can have a look-see at it, but I only have 2 units in the "bone-yard" so I can't promise anything, but hey, it won't hurt to have a look! :'> |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Kevin C
|
|
« Reply #19 on: February 10, 2005, 12:21:50 pm » |
|
Hello
I wrote this last night & then went back to reveiw the whole thread.
I think the Vari-price is just going in the trash or I could donate it to the boneyard for others. I will test my three new ones when they arrive & then send a few for rehab.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
Pat Pixley
Guest
|
|
« Reply #20 on: February 10, 2005, 05:01:26 pm » |
|
Hey this is great news John I'm going to send one to you
plus a donor for you also I will email you later
Thanks
Pat
|
|
|
|
|
Logged
|
|
|
|
|
