Vendo v90 questions

Group
looking at a  V90 Vendo Machine that looks like it was converted to
cans.. Is there away to convert it back to Bottles?
If so were can i find parts.
I'll attach a pic of the dispense area

Pic again

[johnieG]

Sure, it's pretty straight forward, you can replace the can rack with a bottle rack, first you need a "doner" bottle rack from another VF90,then you remove the shelves,remove the four wires off of the vending solenoid & switch at the bottom of the rack (inside the rectangular can) remove 6 screws & pull the old rack off of it's index/ailignment pins (at the rear of the liner/tank,& reinstall the other "can" rack in it's place. and if your shelves have a sheet metal rail running down the middle of them (length-wise) you will have to remove it
in order to allow bottles to be vended again.  '>

it's about a 1-1/2 hour job if you are handy....hope this helps...JohnieG  '>

Johnie,
so were can i goto for a bottle rack for this model??
Is there any sites with just parts or machines for parts out there?