SMC Discussion Areas
November 26, 2024, 10:04:01 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Coin Mechanisms (Moderators: johnieG, Jim) > Coin mech clicking ?
Pages: [1] 2  All   Go Down
« previous next »
  Print  
Author Topic: Coin mech clicking ?  (Read 9953 times)
0 Members and 2 Guests are viewing this topic.
williebman
Newbie
*
Offline Offline

Posts: 19
« on: October 30, 2012, 11:04:24 pm »
Im new to this. I have a vendo 56 with a national rejector model 9-03-005. 115 volts. 60 cycles.  My problem is as soon as I plug the coin mech into the female plug the coin mech starts clicking.  On the bottom left of the mech I see the mechanism moving. How do I fix this ? Thanks
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #1 on: October 30, 2012, 11:42:53 pm »
Should be a switch on the bottom of the mech - sounds like it is going through payout motions.
Clicking is most likely the CREMS (coin return electromagnets). Unplug the mech, clip the wires to the magnets. Only purpose of the CREMS is to block acceptance of coins when the machine is empty - not necessary for home use.
Thought I read that you wanted to put a free-vend switch in?
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
williebman
Newbie
*
Offline Offline

Posts: 19
« Reply #2 on: October 30, 2012, 11:49:07 pm »
Ya I'm getting the free vend kit but just incase I wanted to use the coin mech in the future I'd like to know how to operate it.
Logged
williebman
Newbie
*
Offline Offline

Posts: 19
« Reply #3 on: October 30, 2012, 11:53:07 pm »
Where are the wires to the magnets located? Thanks
Logged
williebman
Newbie
*
Offline Offline

Posts: 19
« Reply #4 on: October 30, 2012, 11:55:11 pm »
Also tried the on and off button on bottom right if mech and it still clicks.
Logged
williebman
Newbie
*
Offline Offline

Posts: 19
« Reply #5 on: October 31, 2012, 05:30:32 pm »
Ok I cut the wires to the coin mech magnet. Hope these were the right ones?its not making the constant clicking noise. Now  When i put coins in it just falls all the way down and out ? Anyone know why it's doin this? Thanks !
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #6 on: October 31, 2012, 05:58:28 pm »
Quote from: williebman on October 31, 2012, 05:30:32 pm
Ok I cut the wires to the coin mech magnet. Hope these were the right ones?its not making the constant clicking noise. Now  When i put coins in it just falls all the way down and out ? Anyone know why it's doin this? Thanks !

Yes, because you cut the wires to the coin-reject-electro-magnets, which when de-energized, will reject all coins to the coin-return slot.  upside
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
williebman
Newbie
*
Offline Offline

Posts: 19
« Reply #7 on: October 31, 2012, 06:08:38 pm »
Oh ok koo johnie G !! I'm trying to see if when I put the 20 cents it requires if it will work to vend a soda. How do I know if its working or try to vend it before I get my free vend kit. Sorry of all the questions johnieG. Thanks for the help
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #8 on: October 31, 2012, 06:13:09 pm »
I don't know what coinmech you are dealing with, but most have a coin switch(es) with a whisker-wire that sticks out in the path of the coins as they fall through the 'mech, if you "flick" the coin-switch whisker, it should simulate a coin passing, or you can try to nip off the wire "fingers" of the CREM magnets you've just disabled so the won't block the path of the coins as they pass through the rejector.
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
williebman
Newbie
*
Offline Offline

Posts: 19
« Reply #9 on: October 31, 2012, 06:16:41 pm »
I have a national rejector
Logged
Pages: [1] 2  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!