SMC Discussion Areas
November 26, 2024, 09:18:30 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Dixie Narco 312?  (Read 6133 times)
0 Members and 2 Guests are viewing this topic.
theredfro
Newbie
*
Offline Offline

Posts: 14


« on: September 04, 2012, 07:48:06 pm »

Hi guys,

This is my first machine, so please forgive any moronic things I say/ask.  I just picked up a Dixie Narco "DN-312/180-6" from a friend of mine.  It runs well and the coin mech works most of the time, although I will probably be switching it over to free vend.  (Funny enough, I set it to charge .05 per vend, and it gives .25 change on .25, .10 change on .10, but no change for a nickel...)  A light fixture was added, and the bottle opener has been covered up with a new front panel (sheet metal or fiberglass?). 

I can't find information on this machine anywhere.  I've found a few pictures of the same model as 7-Up or Dr. Pepper machines.  Are there any other Dixie Narco machines that use the same parts?  Specifically, I need sold-out lights, new buttons, part of the T-Lock base?, maybe a light that will fit the original fixture, and a coin box.  I'd love to switch it over to some brand of root beer, Dr. Pepper, Mt. Dew, etc. but the sides are covered with some type of Coca-Cola sticker/decal. 

Also, a general question: what uses most of the power in these machines?  My Kill-a-Watt indicates this will cost about $215 per year, or $17.67 per month.  I'm just wondering if I add a switch for the light if that will cut the cost significantly, or if the compressor uses 99% of the power. 

Oh right, and the pics.
Logged
theredfro
Newbie
*
Offline Offline

Posts: 14


« Reply #1 on: September 04, 2012, 07:49:55 pm »

And a couple more pics.  These show the inside.  The first shows evidence of the bottle opener, and the second shows the new light fixture installed and the lack of a proper coin box.

I'd love any feedback.

Thanks,
Josh
Logged
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938


« Reply #2 on: September 04, 2012, 08:40:29 pm »

Welcome to the board!
May take a day or two but folks with later model DN's should chime in.

The light won't matter a whit on current draw. Having good door seals and keeping the machine full of product will reduce compressor cycle time.
Creighton
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #3 on: September 04, 2012, 08:42:28 pm »

for sold out lamps for this model try over at http://www.veii.com also you can plug the compressor into an air-conditioner rated appliance timer & keep it off when you are not home & late at night, just turn it on again about 1-1/2 hours before the time you wish to have cold sodas ready.
« Last Edit: September 04, 2012, 08:52:02 pm by johnieG » Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
theredfro
Newbie
*
Offline Offline

Posts: 14


« Reply #4 on: September 05, 2012, 09:30:22 am »

The appliance timer is a great idea.  I ordered one this morning.  

I went to veii.com and their site isn't very easy to navigate.  I found a few things I think I need, but being a noob, I'm not exactly sure what the "T-Handle Body Flush Mount" is and there is no description nor a picture.  I can't find the selection buttons either.  Mine measure approximately 2.25x5.25 inches, and I can't find any on their site that say they are close to those dimensions.

There is a seller on ebay selling sold out lights, but they look a little different than mine.  Are these pretty standard for most DN machines?

http://www.ebay.com/itm/310409614209

Thanks for the suggestions,
Josh
« Last Edit: September 05, 2012, 08:59:58 pm by theredfro » Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!