Cavalier C 55D. Is it missing something?

[darrelcraig]

Here are a couple of pics of the vending mechanism.  The one with 2 arrows is a shot throught the lower right opening. The 2 arrows point at the vending levers on that side.  The pick with 1 arrow shows the gear which is attached to the motor. 

If you email me at darrelcraig@yahoo.com, I'll send you the high quality pics so you can see them better.

[Jcarter168]

Darrel, thanks for the pics I think I see the difference now.  In comparing the pics of the one I posted and yours, it appears that the pieces that are missing or the two metal (backplates?) with the round holes in them.  So, my question is, what are these for and are they necessary for the machine to vend?

[darrelcraig]

I'm not at home until this weekend, so I'll have to guess at the answer.  Their are usually movable plates in the back which allow you to increase or decrease machine depth to accomodate taller or shorter bottles.  This appears to be what you talking about.  Your model may be slightly different, so those pieces could be a little different. Remember, sheet metal parts can be fabricated.  Mechanical parts, however, may be tough to find.  I'm a novice too, so any expert advice on what I'm saying is appreciated.

[zadd]

Looks like he wants 200.00 OBO now . Maybe you can get it cheaper now

[Jcarter168]

I picked it up for $125.  Looks like I'm going to need a lot of help from C55 owners.   Anybody have any advice on restoring the original sign or replacing it with a light up?