SMC Discussion Areas
November 23, 2024, 04:06:48 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Newbie needs help with a Choice Vend CVC-142  (Read 4861 times)
0 Members and 2 Guests are viewing this topic.
phoneguydave
Newbie
*
Offline Offline

Posts: 12


« on: August 10, 2012, 09:31:10 pm »

Hi.  I got my first coke machine (choicevend cvc-142) a few weeks ago.

It worked GREAT for a week.  Then, all of a sudden, it stopped vending.

Put my quarter in (set for $0.25), and it goes to the machine but doesn't do what it is supposed to to allow
a selection to be made.

It has a coinco S75-9800B coin changer...I took it out and using the book, I checked everything.  It seems to be operating fine..but
I can't be sure.

I'd really appreciate any suggestions.  When I put my quarter in before, I heard a "click" which would then allow any of the 4 selections to be
selected.

The motors on each of the selections seem to work fine when I activate manually.

Also, there are what appear to be 6 relays; one for each selection, a "hold" relay and then another one at the bottom of the relay box.
When I unplug/replug the relay box into the harness, the "hold" and bottom relay both pull in and stay in.  Not sure if either/both
are supposed to be continually energized or not.

Very frustrating having to use my key to get a nice cold soda (or water for my kids)...would love to be able to get it so
the quarter allows a selection!

I'm in Mass, and would appreciate any suggestions what to try, or if anyone knows a knowledgeable person in the area to call, I'd
appreciate it!

---Dave
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #1 on: August 14, 2012, 10:56:17 pm »

Dave,

Welcome to the Site.

Best to shoot some pictures so we can see what you are talkint about.  I'm not familiar with you particular make or model.  I had a newer style machine that I spent hours trouble shooting,

I discovered that there was a broken magnet in the coin mechanism not allowing the credit ( coins ) to validate to open the vend relay.  Once the vend relay clicks open it should give power to the control panel (buttons).



Take a picture hope others chime in.

Jared
Logged
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938


« Reply #2 on: August 15, 2012, 01:03:34 am »

Welcome to the site.
Best to narrow down the possible problems. I'd start by wiring up JonnieG's free play switch. This will isolate wether it is the vend stack electronics or coin mech.
Creighton
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!