SMC Discussion Areas
November 26, 2024, 07:03:35 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Refrigeration (Moderators: johnieG, Jim) > Compressor Size in a CS-96?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Compressor Size in a CS-96?  (Read 3398 times)
0 Members and 1 Guest are viewing this topic.
Blind1968
Soda Jerks
*****
Offline Offline

Posts: 784
« on: May 14, 2012, 09:55:08 am »
I have a question about the actual size of my compressor. I have a Caviler CS-96B that I am putting the final touches on and have noticed the clicking coming from the compressor. So I am looking at installing a 3-in-1 relay on it but don’t know the actual or hp of the original compressor. I think it is a ¼ but want to be sure so I order the right parts. I am fairly confident it is the original compressor unit.
Logged
~ Bryan
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: May 15, 2012, 09:14:44 am »
They are typically 1/4 HP on these models
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Blind1968
Soda Jerks
*****
Offline Offline

Posts: 784
« Reply #2 on: May 15, 2012, 09:33:13 am »
Great thanks!  The data plate on the base was scuffed up so I could not tell for sure and I didn't want to order the wrong 3-in-1 relay.
Thanks again for the assistance.
Logged
~ Bryan
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!