westinghouse coke machine wb60-c1-d

[krovel]

Hi everyone, this is my first post and I wanted to share a westinghouse coke machine I recently purchased. I paid $200 for and am sure i overpaid so please don't tell me.

model# wb60-c1-d
serial #22523830

it is missing some parts so if anyone can tell me what they are or where to locate a service manual it would be most helpful.  Also if anyone knows what parts from another machine I might be able to use that would helpful also.

thanks

[collecture]

You can get a manual from Fun-Tronics.
Some parts can be had from the older brothers (the WB-78 and WB-102). You will have to cut their stack down to fit the 60 though.
I restored one a while back, so check out the Photo Gallery under Member's Restorations. I uploaded lots of pics, which you can compare to.
http://soda-machines.com/index.php?option=com_gallery2&Itemid=66&g2_itemId=5815&g2_GALLERYSID=6824f4078617d0ef72f1fcd5a8ec4d4a

Good Luck!

[tkaz]

Tough to tell, but you might need the vend motor as well, it would be at the bottom left next to the evaporator.

[collecture]

Tough to tell, but you might need the vend motor as well, it would be at the bottom left next to the evaporator.

It appears missing as does the selector linkage.
Hate to rub it in Krovel, but yes, considering the missing parts, you did overpay!
On the bright side though, everyone here has overpaid for a machine (or two). Now that you have found this site though, hopefully it won't happen again. Just ask away about machines before you buy! Be careful not to divulge too much info on it as lurkers here might nab it from under your feet.
Chin up!

[LEDCREATIONS]

I agree with the parts missing. Vend motor, linkage and bottle rack. You find a vend motor and linkage, if you didn't want to additional money into it you could build a bottle holder out of wood for the time being to at least enjoy it till you find one