|
johnieG
|
 |
« on: July 26, 2004, 10:44:06 pm » |
|
I've had a few emails inquiring where the " free play" switch could be mounted, I suggest not locating it in the bottle opener opening, due to , well it's wet there!  ( soda fizzing up & splashing around) so here's where I've been mounting mine , in the coin return cup.
In this example , it's a Vendo VF63/Coke . I've modified a Dollar bill adapter, by cutting off the four pin molex connector from the one end, & popping it open to wire it using pins #1 & #3, ( the pins & sockets of the adapter are wired to pass each location straight through, ie: male #1 to female #1, etc.)this allows me to plug it into the jones connector & also keep using the coin mech. as well, you other people who are rewiring a door harness/machine, might wish to include a fuseholder in series to pin one, as shown ( to protect the door harness from shorts from say, a blown ballast, coinmech. etc.) Anyway, well ....here ya go.
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #1 on: July 26, 2004, 10:45:23 pm » |
|
Flipside...
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #2 on: July 26, 2004, 10:47:02 pm » |
|
Up & over...
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #3 on: July 26, 2004, 10:50:01 pm » |
|
the adapter....
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #4 on: July 26, 2004, 10:52:12 pm » |
|
and the rest...
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #5 on: July 26, 2004, 10:54:51 pm » |
|
the finished results..., hope it helps you Guys & Gal's out there...JohnieG
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #6 on: July 26, 2004, 10:58:37 pm » |
|
My humble lil' VF63
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
