VMC Dual 27 Parts Needed

[Picklef16]

Hi All...new to the forum and have already found a lot of helpful posts.  This is my first restoration of a Coke machine and it has been in the making for years.  Bought the machine in 2004 but didn't start working on it until 2006.  After 5 military moves, 1 year remote, and one year deployed, I am finally getting the pieces of this machine back together.  I am on the hunt for a couple of parts and hope someone here can help me out.  I need:

1 door hinge
Inside trim (not sure what it's called) it holds the black plastic pieces in place that cover the insulation

I'll see if I can attach a photo.

Creig

[collecture]

1 door hinge
Inside trim (not sure what it's called) it holds the black plastic pieces in place that cover the insulation

Hi Creig and welcome!
Do you need the main door hinge or a coin door hinge?
The Breaker Strips (that is what they are called) can be obtained from Fun-Tronics.
Part Number 62D
http://www.fun-tronicsllc.com/index.php?crn=327&rn=860&action=show_detail

[Creighton]

Welcome to the board!!
Creighton

[Picklef16]

I need a main door hinge.

I have the Breaker Strips...I'm missing a couple of the aluminum trim pieces that hold the breaker strips in place.  I've checked the online stores but can't find these pieces anywhere.  Any suggestions?

Creig 

[collecture]

OK - listed as a Breaker Strip Cover in my VMC-33 manual - not even listed in my VMC-27A manual. It says that 6 are needed, so you have a sample since they are all identical. Seems like they would be an easy part to fabricate.
Sorry -wish I could help - someone may have them.
Good Luck!

[Picklef16]

I'll try to bump this up to see if anyone out there has come across these parts lately...

Still need a main door hinge and the "Breaker Strip Cover" aluminum strips.  Additionally, I need the bezel for the bottle chute and the flapper for the bottle chute.

Would appreciate any suggestions on where to find these parts.  I've searched online and checked with a local machinist who said he could "probably" do the hinge ($$$$$).  Thinking it's just a waiting game now hoping to come across the parts I need.  Would love to finally get this machine completed.

Thanks for the help.
Creig

[MoonDawg]

      I have a bezel for a 27 bottle chute.

[Picklef16]

Thanks, can you send a picture and price to my e-mail at picklef16@yahoo.com?

Creig