SMC Discussion Areas
June 15, 2024, 11:05:52 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2 3  All   Go Down
  Print  
Author Topic: Looking for CSS-96 (or CS-96C/E) door liner and other parts  (Read 10622 times)
0 Members and 1 Guest are viewing this topic.
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« on: January 15, 2012, 08:46:46 pm »

UPDATE 04/22/12 - Just needing bottle opener bezel now

As this is a larger machine I know that these liners are probably not reproduced.  Obviously liners for CS-64C/E can be found new, but I assume these larger ones cannot.  I know I could easily get the same thickness of plastic and have one cut (since it is all mostly flat), but I dont' know how I would accomodate the bulge at the bottom where the wires and tubes go up from the compressor.  Anyone have a used one in good condition?

Also, the bottle opener hole is larger than what I've seen on these Cavalier machines.  Anyone know where I can get a larger bezel?






Lastly, where can I get a lock mechanism to complete this door handle?
« Last Edit: April 22, 2012, 10:29:38 pm by brasskey » Logged
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #1 on: January 16, 2012, 09:36:01 am »

Sorry, I just realized I put this in pre-60s machines. Please move if needed.
Logged
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #2 on: February 13, 2012, 12:55:59 am »

Still looking for a few parts for this machine (liner, bottle opener trim, and lock mech).  I just got it back from soda blasting and now it's on to body and paint.
Logged
Funtronics
Soda Jerks
*****
Offline Offline

Posts: 1112



« Reply #3 on: February 13, 2012, 08:40:51 am »

We have the T bar lock and handle. The door liner you will have to fabricate.
Logged

Rod
Fun-Tronics
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #4 on: February 13, 2012, 09:15:08 am »

I have an early 60's cs 96 for parts I will look at the door liner and see what condition its in and let you know.


Brian
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #5 on: February 13, 2012, 07:03:25 pm »

We have the T bar lock and handle. The door liner you will have to fabricate.

Thanks. I will find the lock on your website.


I have an early 60's cs 96 for parts I will look at the door liner and see what condition its in and let you know.


Brian

Please do. That would be great if it's in decent shape.
Logged
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #6 on: February 13, 2012, 10:44:11 pm »

I had a look at it today it has a crack but no missing pieces ill take a pic of it and post it so you can see it. other than that its nice and in decent shape
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #7 on: February 13, 2012, 11:05:10 pm »

I had a look at it today it has a crack but no missing pieces ill take a pic of it and post it so you can see it. other than that its nice and in decent shape

Better than what I currently have.  Mine disintegrated on the edges when I took it off (combination of being screwed down too tight and the age of the plastic).  I'd like to see a pic when you have time. Thanks.
Logged
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #8 on: February 17, 2012, 09:17:23 am »

It looks good so far let me take out the screws to make shure mine doesnt have the same issue yours did Ill check it out this weekend. and the good thing is if you do need it im only 100 miles south if you.
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #9 on: February 17, 2012, 09:16:08 pm »

We have the T bar lock and handle. The door liner you will have to fabricate.

Please check your PMs.  I messaged you last week to see if I located the correct lock on your website.
 

It looks good so far let me take out the screws to make shure mine doesnt have the same issue yours did Ill check it out this weekend. and the good thing is if you do need it im only 100 miles south if you.

Great, thanks so much for looking into it.  Where are you located?
Logged
Pages: [1] 2 3  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!