anyone know the length needed for the tumblar cam lock on stoner junior?

[Slapshot42]

I used a 7/16 lock cam for lower storage cabinet, worked great.  I need to pick up a 5/8 lock cam for the main door. I tried intially using a 5/8 down below and the threads were not long enough.

I assumed both would be 7/ 16.  I looked at the lock core link Curtis referenced at noticed the lock was 5/8.

[Jim]

I used 5/8" and 7/8"

[Slapshot42]

I used 5/8" and 7/8"

Oops; correction I used 7/8.  We use an open end 7/16 wrench at work all the time... at least I had the 7 right....


 Which closing bracket did you equip it with?  I was trying


 
to figure out what it catches on to close...?

[Slapshot42]

Jim,

Could you snap a photo of the inside locking bar?

I installed the 5/8 for the main door.  I can move the locking bar up and down but I cant get it to lock.  Does the tumbler need to be positioned a certian way?

The lock comes with 3 locking bars which are interchangable.  1 1/8 inches, 1 1/4, and 5/8.  I have the 5/8 bar installed.

Pictures to follow..

Thanks...