SMC Discussion Areas
November 27, 2024, 10:21:04 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Identifing vending models  (Read 4802 times)
0 Members and 1 Guest are viewing this topic.
t-man
Guest
« on: June 25, 2004, 09:05:38 pm »

I own two soda vending machines.  Where should I look to find the model numbers on these machines ?  Both machines appear to be late 70's or early 80's models.  One is a Pepsi machine and the other a Coke machine.

 Any help would be appreciated.
Logged
t-man
Guest
« Reply #1 on: June 28, 2004, 09:53:03 pm »

Have included photos this time.  Would appreciate any help on where to find model number identifications.
Logged
t-man
Guest
« Reply #2 on: June 28, 2004, 09:54:49 pm »

Here is photo of second machine, both machines in good working order.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #3 on: June 29, 2004, 06:12:00 am »

There should be a manufactures tag somewere on the outside of either machines chassis, ( some times these "disappear" when machines are "retired" from a bottlers route, ie: no serial no.'s hint-hint  ':p' ) then when you buy them on Greed-bay or where-ever, you are stuck trying to figure out what model you have, (case in point) look around on the inside for the wiring diagrams and/or the loading instructions there may be a copyright notice that I.D.'s the maker,

The flat-front Pepsi looks like an Vendo to me , & the other one looks like a Dixie narco, but it's just a guess.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #4 on: August 15, 2004, 02:25:35 pm »

I have a Pepsi machine that looks alot like yours. Mine is a Dixie-Narco model DNCB 240/138-6. Mine has an I.D. plate on the left side of the door if your facing it. I've been trying to find a manual for it on-line. I'm not having much luck though. If yours is the same and you come across a manual, could you let me know?

Thanks,
Dan
Logged
t-man
Guest
« Reply #5 on: August 24, 2004, 08:04:19 pm »

Quote (danl44 @ Aug. 15 2004,3:25)
I have a Pepsi machine that looks alot like yours. Mine is a Dixie-Narco model DNCB 240/138-6. Mine has an I.D. plate on the left side of the door if your facing it. I've been trying to find a manual for it on-line. I'm not having much luck though. If yours is the same and you come across a manual, could you let me know?

Thanks,
Dan

Dan,
  My Pepsi machine is a DNCB/240.  If I find a manual for it I will contact you.  Thanks to all for the help.

                                                            t-man
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!