SMC Discussion Areas
November 23, 2024, 09:31:28 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: WD-10 Drain Tube  (Read 5890 times)
0 Members and 1 Guest are viewing this topic.
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« on: December 06, 2011, 01:48:47 am »

All,

Looking at a generic Westinghouse manual.  I'm trying to figure out how to route my drain tub which connects down below the tub.  I have never seen an actual drain tub that hadn't rotted off the machine.

WD -10 ( Drain Tube to Condensation Pan.

It looks like a "pre bent " tube like that are made for some of the upright machines, etc.  Has anybody done one of these before.  It also calls for some type of rubber grommet, and special clamp to hold the hose. Right now I have roughly 4' inches of 1/2 inch tubing tach welded to the bottom of the tub.  There is a whole in the false bottom where the tube stick out a few inches.   I had thought about just getting a clear piece of tube, and using a metal clamp similar to attaching rubber hose like on hose on a car.  I'm afraid that the clear 1/2' plastic tubing would be incorrect, and not ridging enough.

Anybody know of some hardware clamps, rubber groments, and drain tube that may work for routing condensation properly to the drain pan?

Thanks!
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #1 on: December 06, 2011, 01:52:21 am »

Copper tube 1/2' copper.
Logged
Funtronics
Soda Jerks
*****
Offline Offline

Posts: 1112



« Reply #2 on: December 08, 2011, 07:21:19 am »

If I had the original one I could make you one.
Logged

Rod
Fun-Tronics
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #3 on: December 11, 2011, 12:16:10 am »

Rod,

If I can get the measurements from where the tube come out the bottom of the tub roughly over to the condensation pan would that work?

I don't really have any other options but try to duplicate what I see in the picture.  Do you use a rolled copper to make these?

Jared

Logged
Funtronics
Soda Jerks
*****
Offline Offline

Posts: 1112



« Reply #4 on: December 11, 2011, 10:37:28 pm »

I don't think that I can make it without a original to copy.
Logged

Rod
Fun-Tronics
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #5 on: December 12, 2011, 12:38:51 am »

Maybe this will help in design....maybe not...
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Funtronics
Soda Jerks
*****
Offline Offline

Posts: 1112



« Reply #6 on: December 12, 2011, 08:17:34 am »

I need the measurements of the area that I marked in red.
Logged

Rod
Fun-Tronics
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #7 on: December 12, 2011, 10:51:22 pm »

Rod,

We are moving tommorow a little crazy around here I will measure it probably sometime next week.

Tom,

Nice illustrations thank your for providing.  If you have any additinal WD 10 reference materials for sharing
I would be interesting in obtainigs copies for reference.  I have the generic manual, your looks a lot more detailed??

Thanks
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!