SMC Discussion Areas
November 27, 2024, 12:58:37 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: 1 2 [All]   Go Down
  Print  
Author Topic: Issues with door light on Vendo 110  (Read 9715 times)
0 Members and 1 Guest are viewing this topic.
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« on: October 21, 2011, 11:04:12 pm »

The bottle door light on my Vendo 110 is having issues.  I'll press it and hold it down and it will turn on fine.  But, it only stays on for a few seconds to maybe 10-15 seconds as most and then just turns off and never comes back on (unless I hit the switch again).  Any ideas as to what potential problems I should be looking into before I take things apart?
« Last Edit: October 21, 2011, 11:21:23 pm by brasskey » Logged
Kilroy
Soda Jerks
*****
Offline Offline

Posts: 4278



WWW
« Reply #1 on: October 22, 2011, 07:08:44 am »

sounds like bad ballast.
Logged

"Restored they go for $6-7,000!!"
Member : Michigan Mafia
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #2 on: October 22, 2011, 08:41:44 am »

Have you tried a new lamp?  if yours is getting old & the tube ends are blackened, it may be time for a fresh one.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #3 on: October 22, 2011, 10:00:02 am »

sounds like bad ballast.

Where is the ballast located?  I just don't want to take more apart than I need to since I have no idea where it is.


Have you tried a new lamp?  if yours is getting old & the tube ends are blackened, it may be time for a fresh one.

The bulb looks pretty old so I'll go ahead and replace it too.
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #4 on: October 22, 2011, 10:34:02 am »

Try the bulb first...the ballast is 50 screws away behind the main door liner!
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Ken R
Soda Jerks
*****
Offline Offline

Posts: 694



« Reply #5 on: October 22, 2011, 12:55:21 pm »

It may just be the little starter, assuming it is a flourescent bulb since you're talking about a ballast.  You can pick those up for really cheap at Wally World.
Logged

Vendolator VMC-149
Vendolator VF-56-7
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #6 on: October 22, 2011, 01:21:54 pm »

No starter on a 110
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #7 on: October 22, 2011, 01:38:32 pm »

Yep, no starter on the V-110, the push-to-start switch is the manual lamp start.

Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
brasskey
25 Cent Member
****
Offline Offline

Posts: 308


« Reply #8 on: October 22, 2011, 01:54:20 pm »

Try the bulb first...the ballast is 50 screws away behind the main door liner!


I started with the bulb and it seems to be good. Thanks for the help everyone.
Logged
Ken R
Soda Jerks
*****
Offline Offline

Posts: 694



« Reply #9 on: October 22, 2011, 04:51:38 pm »

Learn something new everyday!!!
Logged

Vendolator VMC-149
Vendolator VF-56-7
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #10 on: October 22, 2011, 07:29:48 pm »

The ballast as mentioned is behind the door liner.  If you have to go that route once you pull the main door liner off you will see a brown block with wires,  etc.  If you need a new one SJW or Funtronics should have one.  It will be covered or around the insulation.

Mine is also bad on my 110.  I pulled my main door cover off to change out my coin.mech.  I fixed my
coin mech but lost motivation on the light for the time being. 
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #11 on: October 22, 2011, 08:36:26 pm »

I pulled my main door cover off to change out my coin.mech.

Why? You can remove the mech easily without removing the liner.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
VMAXMAN
10 Cent Member
***
Offline Offline

Posts: 236



« Reply #12 on: October 23, 2011, 11:00:20 am »

The bottle door light on my Vendo 110 is having issues.  I'll press it and hold it down and it will turn on fine.  But, it only stays on for a few seconds to maybe 10-15 seconds as most and then just turns off and never comes back on (unless I hit the switch again).  Any ideas as to what potential problems I should be looking into before I take things apart?
mine did that and turned out to just be the lamp
Logged
cokecolaman
Soda Jerks
*****
Offline Offline

Posts: 986



« Reply #13 on: October 23, 2011, 11:02:35 am »

What kind of life are you getting out of the light bulb in the door...I'm changing mine about every year and a half.
Logged

VMC Coke 88 (nice original)
VMC Pepsi 81
VMC Orange Crush 81
VMC Squirt 81
VMC Dr. Pepper 81
VMC RC 81
VMC 7up 81 st
Vendo 44 original
Jacobs 56 Pepsi
Cavalier 33
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #14 on: October 23, 2011, 11:02:47 am »

Not sure I know an easier way?  The mech rod went behind the liner and attatched to the linkage arm with a
pin inserted.




Obviously missed something.....

Jared
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #15 on: October 23, 2011, 11:14:59 am »

      That is what this plate is for.
Logged

Glen
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2629


Jared


« Reply #16 on: October 23, 2011, 12:31:21 pm »

Well, i guess i know for next time.
Logged
Pages: 1 2 [All]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!