SMC Discussion Areas
November 23, 2024, 02:15:07 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Soda Machines, Coolers & Dispensers > Picnic Coolers (Moderator: Jim) > braces
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: braces  (Read 5320 times)
0 Members and 1 Guest are viewing this topic.
junkynotch
Newbie
*
Offline Offline

Posts: 6
« on: July 18, 2011, 07:56:07 pm »
has anybody ever put a brace between the inside lid and the outside lid...im almost done welding patches and would like to brace the lid to keep the top from dipping in.  I looked and didn't see anything on the subject I have an idea but if somebody has done this before and has a better idea.....im all ears...

                                                          thanks in advance smile
Logged
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768
« Reply #1 on: July 18, 2011, 07:57:18 pm »
what machine are you working on?
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #2 on: July 18, 2011, 08:47:27 pm »
Or is it a picnic cooler lid?
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
junkynotch
Newbie
*
Offline Offline

Posts: 6
« Reply #3 on: July 19, 2011, 12:44:06 pm »
Picnic cooler lid
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #4 on: July 19, 2011, 05:30:26 pm »
Ah... the only reason they collapse is because some little kid ( or a big dummy) sits on the lid, or uses it for a stepping stool. maybe some self expanding foam would give it some firmness?
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
junkynotch
Newbie
*
Offline Offline

Posts: 6
« Reply #5 on: July 20, 2011, 04:37:39 pm »
Ha Ha well the reason i ask is i have a lot of friends that are big dummies biggrin biggrin
So I figured I would cut the middle man out.  I have a piece of really thin half inch tubing I can make some supports out of...I know its probably not necessary but with my people I hang around with I would rather be safe then sorry.  And thank you for the quick responses I'm sure ill have a bunch more questions before its over with. 
                                                               Thanks again in advance biggrin
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!