Westinghouse vend motor oil

[Pat Pixley]

for those of you that have done a Westinghouse or had one  or have one , I need to know what oil to use for the vend motor
I recieved a email from Tom  with a photo of the tag both sides  but I cant read the kind of oil , or what kind i can use .
post picture later when done with this machine 

Thanks
  Pat

[Creighton]

Hey Pat,
20 weight non-detergent should be fine. 3 and 1 makes a "motor oil" that is 20wND.
Creighton

[collecture]

Hey Pat,

The backside of the tag says:

"Remove screw where (oil) appears.
Place tablespoon of Medium Grade
Low Pourtest Oil every 1 1/2 months
Replace screw
It is necessary occasionally to place
a few drops of oil in motor bearing.
A standard number 20 W motor
oil will also prove satisfactory."

Creighton was spot on!

[Pat Pixley]

Thank you Boys for all your help   
 I would sure like to get a copy of that tag so I could get one or two made
(Hint Hint Hint  Tom )  just a photo copy would work  .
 If you want and have the time  .

Pat