SMC Discussion Areas
November 23, 2024, 08:36:07 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Refrigeration (Moderators: johnieG, Jim) > 1/3 hp TO REPLACE A 1/4 hp
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 1/3 hp TO REPLACE A 1/4 hp  (Read 6488 times)
0 Members and 1 Guest are viewing this topic.
markinaz
Guest
« on: May 13, 2011, 12:59:29 pm »
Greetings gents.  Lots of good info on your site- I like it!

I'm working on my 1st machine, a Cavalier CSS-80.  The compressor went shortly after cleaning it up and putting it into service in my garage.  :-(   The compressor is shot.  It measures about 15 amps before it trips the cut-off.  I believe its a 1/4 HP.  1st question- Is it OK to replace it with a 1/3 hp? 
I plan to convert the machine over to R134A and then add a larger condenser to insure adequate cooling.  I assume the old data plate which specified 16 oz of R-12 is not accurate for several reasons now.  I'm hoping the proper amount of R134a will become obvious by observing the pressure.  Is that correct?

Thanks,
Mark
Logged
mznb1u
Soda Jerks
*****
Offline Offline

Posts: 3350


Those Who Stay Will be Champions!
« Reply #1 on: May 13, 2011, 02:01:40 pm »
Mark,

Welcome to the site. happydrinkers  You will find that this is a very helpful forum.  I am sure that one of the experts will have some advice for you on your compressor/refridgerant questions.  Another option would be to call Global Compressors--a site sponsor.  I am sure they could point you in the right direction.

 drinking Tim drinking
Logged
globalcompressors
Soda Jerks
*****
Offline Offline

Posts: 839


Global Compressors (Eric)


WWW
« Reply #2 on: May 13, 2011, 04:53:36 pm »
No Sir...don't do it.

The condenser, evaporator and the cap tube are all designed for 1/4hp.
It's kinda like putting a Ford 460 block into a Pinto without changing the
radiator...

Stick with a 1/4 hp compressor and save yourself a ton of heartache, time
and cash.
Logged
how's that OBAMA CARE workin' out for ya?
markinaz
Guest
« Reply #3 on: May 13, 2011, 06:09:38 pm »
More power!!  OK, maybe not this time I guess. 

So what about when you go green?  I mean converting to R134a.  Is it a problem for these machines.  I read they don't cool as well with the original condensers still in them.  If I'm gonna be brazing I might as well plan ahead & compensate now while its all appart.

Mark
Logged
Yarochrehc
Soda Jerks
*****
Offline Offline

Posts: 787
« Reply #4 on: May 13, 2011, 07:39:43 pm »
It is true, the system is designed for a 1/4 HP, if you put a 1/3 HP compressor in it your just asking for trouble!
Logged
Bob

Restored
Vendo H63B  Coke in use in basement
Original
Vendo V/VF63/7  Pepsi in use

Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126  waiting for paint
VMC 56
Westinghouse WE-6
globalcompressors
Soda Jerks
*****
Offline Offline

Posts: 839


Global Compressors (Eric)


WWW
« Reply #5 on: May 14, 2011, 07:14:55 am »
Mark,

As long as you change the drier and go with a 134a compressor,
you won't have any issues. There are other refrigerant alternatives
as well but, 134a is the industry standard.
Logged
how's that OBAMA CARE workin' out for ya?
markinaz
Guest
« Reply #6 on: May 17, 2011, 12:03:25 am »
I like that reply Global.  I think I have my plan now. 

So my updated shopping list includes:

1/4 hp 134a compressor
New dryer
Schrader "T" valves (for high & low side)
Vacuum pump
Freon
Oil (for 134a)
Gauges
Brazing supplies

It should be a nice weekend project.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!