CS 64 C help needed?

[cocacola]

Ok thanks for all the help with the sign, It is working and back where it needs to be. Also during this time I got my electrical problems fixed and now I realized that the coin mech isnt working. I know NOTHING about these starting with how to tell what kind it is. I can take a picture of the label and post if anyone can help. The front door still needs tweaking to get it into the correct spot but other than that most of the problems have been solved.

[Pat Pixley]

I'll tell you  Johnie G  is the man for electric coin mechs , he does charge but he does great work.
 you will want to contact him .

[cocacola]

Ok the model number for mine is D11002 and the serial number is 92428 and it is National Rejectors Inc. The problem is that the coins enter but they get stuck in the machine and do not activate the dogs to operate. It could just need cleaning or I think it might need a new solenoid. I hope this helps if anyone can help me

[collecture]

The coins are probably getting stuck in the rejector. Remove the rejector, prop open the gate and run it though the dishwasher.

[cocacola]

Alright so aside from the coin mech stuff, my machine is shorting out my garage again.... I started to isolate if it is a wire and after I cut the wire to the thermostat, it worked. So I am wondering where I could get a new thermostat if I need to

[loman4ec]

Funtronics has them. While you are at it you might as well replace the fan motors.

[cocacola]

how often do the fan motors die? I mean I know its old but what is the life of one

[Creighton]

Correctly maintained from day one they might never die. If you are going to the effort to fix a machine replacing the fans is inexpensive and just a good idea from a saftey standpoint.
Creighton
 

[Pat Pixley]

 The fan motors may be good today but go bad in a week  or could never go bad at all But while you  are there in that area  you may as well as replace both of them it is just a good pratice to get into doing when you have the original fan motors.

[cocacola]

Will funtronics also have them, I briefly looked and found the thermostat on there. Knowing the type of motor would would also help.

For the record, I do not plan on replacing the fan motors now because money has become an issue. On a better note, I fixed the door problem today. Whoever put that door locking bar on there last time messed up, they put it on backwards and the tightened it in the incorrect location. The front door now closes.