SMC Discussion Areas
November 23, 2024, 04:03:20 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Soda Machines, Coolers & Dispensers > Post 60's Machines & Coolers (Moderators: johnieG, Jim) > The Selectivend lives......
Pages: [1] 2 3  All   Go Down
« previous next »
  Print  
Author Topic: The Selectivend lives......  (Read 15712 times)
0 Members and 1 Guest are viewing this topic.
BronzeGiant
5 Cent Member
**
Offline Offline

Posts: 76
« on: July 18, 2010, 09:25:21 pm »
Well, it cools anyway. Put a new plug on the wire where it was cracked and plugged it in and the compressor kicked right on and started to cool. We left it plugged in about 10-15 minutes while we fiddled with the coin changer, which we did NOT get to work yet, but when we unplugged it it was getting cold. I'm happy. I suspect it was probably taken out of service because they couldn't get it to charge enough money for a can of pop. But for whatever reason the biggest worry I had about the machine is over. biggrin

Steve
Logged
Cavalier CS-148-C
Cavalier CSS-64
Selectavend 1-A
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768
« Reply #1 on: July 19, 2010, 07:35:36 am »
Let me know if you need a coin mech. When I come get the other machine and bring you the C64 I will bring you another coin mech that is tested and working.
Logged
BronzeGiant
5 Cent Member
**
Offline Offline

Posts: 76
« Reply #2 on: July 19, 2010, 12:08:17 pm »
Why don't you bring one just in case and that way we'll have both bases covered. 

Thanks
Steve
Logged
Cavalier CS-148-C
Cavalier CSS-64
Selectavend 1-A
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768
« Reply #3 on: July 19, 2010, 02:55:58 pm »
you got it!
Logged
BronzeGiant
5 Cent Member
**
Offline Offline

Posts: 76
« Reply #4 on: July 19, 2010, 05:52:22 pm »
Question:

How do you get the lighted sign out of the machine to service the bulbs. We got the "dashboard" (the wiring diagram called it that) swung out like it's supposed to but couldn't get the sign out. It acted like it wanted to pull down and then maybe out at the top but no luck. How does it come out?

Steve
Logged
Cavalier CS-148-C
Cavalier CSS-64
Selectavend 1-A
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768
« Reply #5 on: July 19, 2010, 06:00:23 pm »
I have no idea with that machine. Most machines have screws on wither the bottom or on one side. Then you pry the sign from where the screws were and it will pop right out.
Logged
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938
« Reply #6 on: July 19, 2010, 06:20:09 pm »
Steve,
Just took a peek at mine. Two screws under the sign and behind the dashboard. Did you take those out?
Mine just lifted out. I'll post a picture in awhile.
Creighton
Logged
BronzeGiant
5 Cent Member
**
Offline Offline

Posts: 76
« Reply #7 on: July 19, 2010, 06:22:13 pm »
Thanks, nope, dinna see the screws, I'm sure that's what caused the problem. I'll check when I get to the machine again, prolly next weekend.

Steve
Logged
Cavalier CS-148-C
Cavalier CSS-64
Selectavend 1-A
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938
« Reply #8 on: July 19, 2010, 07:46:30 pm »
Steve,
You will need a 1" philips screwdriver. Tight working area.
Creighton
Logged
BronzeGiant
5 Cent Member
**
Offline Offline

Posts: 76
« Reply #9 on: July 28, 2010, 04:20:44 pm »
Got another look at this machine last night and did finally see the screws......you ain't-a kiddin' tight work area......dunno if my big fat fingers cab get in there, but I'll try......



Quote from: Creighton on July 19, 2010, 07:46:30 pm
Steve,
You will need a 1" philips screwdriver. Tight working area.
Creighton
Logged
Cavalier CS-148-C
Cavalier CSS-64
Selectavend 1-A
Pages: [1] 2 3  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!