SMC Discussion Areas
November 23, 2024, 02:17:16 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Where and what is this oil!!??  (Read 3954 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: December 23, 2003, 11:59:33 pm »

While transporting my new found Coke Machine on its back I notice it seeped out some thick oil. Where did it come from and do I need to restore the oil? Any help is appreciated, I dont want to plug it in until I know what happened!
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: December 24, 2003, 10:58:13 am »

Bad news is your compressors' leaking oil or there is a hole in a line , maybe it got bent in trasport, more likely it wa bad from before hand, so was it in working condition when purchased? any way looks like you'll be needing to replace and/or repair it, what type of machine do you have here, everybody seems to miss this important bit of information, and of course a picture would help also. but you just can't add oil unfortunatly.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #2 on: December 24, 2003, 11:16:05 am »

heres the machine

Click Here
Logged
Guest
« Reply #3 on: December 24, 2003, 12:31:04 pm »

After further inspection I notice there is a drip pan with a hose going to it that held this sludge. It appears that it has some type of overflow. Oh well, Ill check everything out when I take it apart and restore it!
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #4 on: December 25, 2003, 11:11:02 am »

Well Merry Christmas to you!  Your compressor is probably allright. The sludge that spilled out is most likely old soda pop syrup, not compressor oil as we guessed earlier.
    That drip pan catches the water that forms inside the machine. Here it evaporates.  When a product spills inside, it flows into the pan and stays, until of course you lay it down the first time. You're spared a bunch of money.      
     Plug it in and see if it cools. I bet it will.            Glen
Logged

Glen
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!