coke machine CS-80C

[tooth350]

CS-80C not cooling  both fans are working    it looks like someone already added a 3in1 kit or i think it is wondering what to do? thanks   also wondering if the compresser is bad or a bad 3in1     i'am in a quandry     please help  thanks to all

[90grad]

Is the compressor running at all?

[tooth350]

I don't think so      i replaced the 3in1  and it kept kicking a breaker off in my back room of the garage where i'am slowly fixing it up. I'am getting another one this afternoon and am taking out the whole system out of the bottom today maybe it'll be better acces to it.

[tooth350]

bought a new 3in1 and put it on but the breaker pops off     i'm now thinkingn the compresser is grounding itself out    so it may be time to replace the compresser    now i'am crying

[Creighton]

Hope it is not the compresser. Have you tried another breaker circuit and checked for other bad wiring?
Creighton

[mznb1u]

I'm no electrical expert, but I would change out all of the wiring and check all the contacts before I would spring for a new compressor!

  Tim

[collecture]

Yep - sounds like a short somewhere to me!

[MoonDawg]

        Run the 2 black wires from the 3 in 1 directly to a power source like an extension cord. If it still blows a circuit then the problem is inside the compressor.
        If not, then trace back the rest or your wires until you find the short.

[tooth350]

hmm i will try the 2 black wires first    should i leave the other 3 connected to the compresser while i put the 2 black wires in an extension cord?   thanks   if it doesn't pop the circuit    then i will pull out the slider unit  and replace all the wires  in the bottem         when i got this thing i noticed someone cut the power cord off       also the combination overload relay was still there but looked like it was burned    also if anyone is looking for keys  i took my lock to a lopcksmith  and he had the blanks and made me 2 for about 6 dollars just some info     thanks and i just replaced the glass in the door and all the other lighst now work    and i just found the 10 btl trays           next after compresser working will be paint and  and drinking a lot of beer in my man cave ( lol hopefully)

[tooth350]

hm i pulled out the whole cooling system checked out the wires, brittle, but not open or touching anything so it looks like a total replace . This one must be the original . Looks like i will call the global compresser guy and order a new one to replace.