SMC Discussion Areas
November 23, 2024, 02:18:40 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Vending Mechanisms (Moderators: johnieG, Jim) > HELP_ on 81D
Pages: 1 [2]  All   Go Down
« previous next »
  Print  
Author Topic: HELP_ on 81D  (Read 15511 times)
0 Members and 1 Guest are viewing this topic.
Marvin
Soda Jerks
*****
Offline Offline

Posts: 683
« Reply #10 on: November 11, 2009, 11:43:49 pm »
Everything was moving free on that machine. It just would not return the lever after a vend cycle. I hated to "rig" that spring on there but I couldn't find anything wrong.
Hope you get it figured out.

Marvin
Logged
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #11 on: November 12, 2009, 12:37:23 am »
I've run into that in the past too, and I put a higher grade return spring on the cup assembly and that helped it out..
Logged
Soda Machine Enthusiast since 1996!
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« Reply #12 on: November 12, 2009, 06:34:46 pm »
Sounds to easy to be true but slightly loosen the nut that holds the cup in place . let me know if I'm the winner biggrin
Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
Sodak Bob
25 Cent Member
****
Offline Offline

Posts: 327
« Reply #13 on: November 12, 2009, 11:33:40 pm »
Well I did a combo of the suggestions - I put a new spring on the cup and loosened the nut a little.  It improvede significantly, and I would say it is at 98%.  If this were for someone else, I would strip it apart, but I am going to keep this gal for my own use.  I think as time passes and i use the machine, it will gain the last 2%.  If not, I know where to find help.  Thanks for everyone's replies - your help is MUCh appreciated.    Oh - Tom, dimes are working perfect -thanks...     Time to plug the gal in and have a soda----   thanks again !!!
Logged
Bob
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #14 on: November 13, 2009, 12:04:50 am »
Cheers Bob! happydrinkers
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5880


#1 Soda Jerk!


WWW
« Reply #15 on: November 13, 2009, 03:57:32 pm »
Glad to hear it's working better!
Logged
My six cents,

Jim
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #16 on: November 14, 2009, 06:24:13 pm »
Good to hear it...
It just goes to show, these old machines still need tinkering their whole life.. things will just need adjustments.. even with restored machines I've spent hours with them, adjusting one thing then the next and so on to get it just right.. it's just they way they are!

Good to hear it.. now go have a cold one.
Logged
Soda Machine Enthusiast since 1996!
Pages: 1 [2]  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!