SMC Discussion Areas
July 26, 2021, 06:12:59 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: Coinco mechanism  (Read 9947 times)
0 Members and 1 Guest are viewing this topic.
Bob K
Soda Jerks
*****
Offline Offline

Posts: 803



« Reply #10 on: May 17, 2002, 07:15:18 am »

Thanks johnieg,
Appreciate the advice.  I was able to fix the coin return lever by slowly  'nervous' taking things apart and noticing what the problem was.

The procedure you mention above is a bit over my head unfortunately.  

An new problem, though.  There's a switch on mine when held in the up position spits out nickels from the coin holder.  Suddenly that seems to be stuck "on".  I hear it humming, and moving the switch up and down has no effect.

This mech has gremlins in it!  'angry2'

Thanks, Bob
Logged
Bob K
Soda Jerks
*****
Offline Offline

Posts: 803



« Reply #11 on: May 20, 2002, 12:01:48 pm »

Well, I fixed the coin return situation - a little patience and slow disassembly and that did the trick.

Thanks johnieG!

Now the coin mech gremlins still do not want me to indulge in a cold one  'sneaky'2.gif" border="0" valign="absmiddle" alt='sneaky2'> .  You know the switch near the bottom of the mechanism that, when pulled up, dispenses nickels out of the bottom?  Suddenly that seems like it is stuck "on", as it just drones away and won't shut off.  No nickels come out either.  What happened?
Can someone help me with this?  Im thirsty  ':p'  ':p'

Thanks, Bob
Logged
Bob K
Soda Jerks
*****
Offline Offline

Posts: 803



« Reply #12 on: May 20, 2002, 08:59:04 pm »

I thought I had already posted that!!  I thought I forgot to hit "submit" or something...  It was on page 2 all along....

Sorry for the double post  'blush'

Bob
Logged
Guest
« Reply #13 on: June 08, 2002, 04:33:13 am »

if want to install a free vend sw you want to jump the #1&#3
pins on the female side where the mech plugs in i use 1/4 male spade term crimp you wires first and insert in the back of the block where the wires go in and install a toggel sw
to find 1 & 3 look at the face of the male plug or if you want it to free vend all the time and your machine has a vend relay take off plastic houseing and put a rubberband around it to close the contacts
good luck  '<img'>  '<img'>  '<img'>
Logged
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!