SMC Discussion Areas
June 13, 2021, 06:40:11 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Coin mech shaft lengths and pin hole locations  (Read 1964 times)
0 Members and 1 Guest are viewing this topic.
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« on: May 21, 2010, 02:08:36 pm »

I am trying to get a database together of all of the shaft lengths for different machines. Mainly Vendo's and VMC however I need the others as well. I have a metal lathe so I can turn down any sizes that i need. I have found the correct thickness rod for vendo's rather cheap at the hardware store and I am now working on the shaft and coin slot on the shaft for a small door machine. Anyone that has this info please share. I need the length of the rear of the shaft of mechanical coin mechs from the back of the mech to the end of the shaft as well as where the pin hole is located and if it is vertical or horizontal.

On the large door/ small door conversion mech that I have the shaft length is 3 3/8 which is longer than a Vendo 81 so is that to a VMC 44? Any info anyone has will be greatly appreciated. I know the length of the V39 and Cav 51 for sire. Anything else I need to know.

thanks
Josh
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!