SMC Discussion Areas
April 20, 2024, 08:09:47 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > The Coin Return > Tutorials & Tips (Moderator: Jim) > 81 bottle door medallion
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 81 bottle door medallion  (Read 6400 times)
0 Members and 1 Guest are viewing this topic.
bmw90w
10 Cent Member
***
Offline Offline

Posts: 190
« on: January 28, 2009, 05:41:14 pm »
 Hey guys I just bought a new medallion gasket, but I am confused. Does the peel off part stick to the door itself, or does it stick to the glass itself? Also what do you think about glass vs plexiglass? I am going to get a new piece cut, should I replace all three with glass? Thanks!
Logged
Cavalier CS-96
Vendo 81-A
Yarochrehc
Soda Jerks
*****
Offline Offline

Posts: 787
« Reply #1 on: January 28, 2009, 06:07:23 pm »
The machines that I have redone I replaced all three peices with glass, it won't scratch after awhile.
Logged
Bob

Restored
Vendo H63B  Coke in use in basement
Original
Vendo V/VF63/7  Pepsi in use

Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126  waiting for paint
VMC 56
Westinghouse WE-6
bmw90w
10 Cent Member
***
Offline Offline

Posts: 190
« Reply #2 on: January 28, 2009, 09:37:34 pm »
will they drill the vent holes too?
Logged
Cavalier CS-96
Vendo 81-A
Funtronics
Soda Jerks
*****
Offline Offline

Posts: 1112
« Reply #3 on: January 29, 2009, 08:54:25 am »
Your gasket sticks to the door. It is best to use a glass piece for your outside piece, and plexi glass for the other two. Hope this helps !! drinking
Logged
Rod
Fun-Tronics
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #4 on: January 29, 2009, 10:52:53 am »
Your glass guy should be able to drill all the holes you need wether in the plexiglass or the regulart Glass.. I've always just used Glass on outside, Plexi on inside and Glass on backside.. guess I might try all glass next time as it's easier to form the gasket around it as it doesn't bend.
Logged
Soda Machine Enthusiast since 1996!
bmw90w
10 Cent Member
***
Offline Offline

Posts: 190
« Reply #5 on: January 29, 2009, 04:46:46 pm »
That makes sense I ll give that a try.
Logged
Cavalier CS-96
Vendo 81-A
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!