Glasco /Ideal 55 coin mech

[zadd]

I recently bought a coin mech of EBay and I got it yesterday and everything looks great the problem is that some one has removed the collar on the flapper shaft . Can this be replace from another mech or just fabricate one . Any advice would be great . Thanks

[coke_and_stuff]

I got your PM, I probably have what you need I have a good 4-5 parts mechs, some have the shafts cut off of them. If you can get me a picture of what you need, I can look. I plan on listing these in a single auction tonight.

Joey

[zadd]

This is the coin mech that is missing the sleeve . I was going to see if you might want to trade your Ideal 35 coin mech you talked about for the mech that came off my machine ? I also have an extra 15 cent coin mech backing plate and mechs I will throw in . I mainly need the collar for the mech I just bought . Let me know if you can help . Thanks Joey

[zadd]

This is the one that came off the machine , It works just needs cleaned up . It has dents from the inside , looks like someone tried to pop out a dent with a ball ping hammer .

[coke_and_stuff]

what I have is rough, I wouldnt let you trade me. Here is what I have, Im not listing this junk on ebay until I hear back from you.





Joey

[zadd]

Yea those are pretty rough  . Do yo know how to change out the sleeve, is it even possible ? I looked at my extra one and don't see how to remove it . I still don't know how they removed the one on the new mech unless there a little diferent .Thanks Joey

[MoonDawg]

       I'm not really sure you need that full collar to make it work. That small one on
your mech looks to be placed properly to keep the shaft centered.

[coke_and_stuff]

I have no idea?? I would think you could get it to work??

Joey

[zadd]

The shaft itself has about an inch of play . If you mount it to the flapper it kinda floats and isn't stable . I know I could figure something out on making it work . I  was just wondering how they removed it and if I could remove one from a doner mech ? 

[zadd]

If anyone has this style of coin mech . I would be interested how the sleeve is put together It looks like it was easly removed . I tried to put one off of a doner mech after a lot of work and the sleeve is slightly different .