dixie narco 320 compressor

[boilerman]

I picked up a dnbc 302/186-7 and it looks good but didn't cool. i replaces the capacitor but I did not get anything from compressor the fans run. what are the pinout on the compressor so I can check for continuity between run start and common make sure the internal overload isn't bad
 any other ideas out there?
 thanks

[boilerman]

It is an embraco compressor. I do not have open circuit on all three pinouts
     X   X 
     
       X

top two are good but bottom one is dead  any ideas

[johnieG]

Here is an example diagram

[boilerman]

I get the following

 a-b 5.6
 a-c  OL
 b-c  OL

is my internal overload fried ?

[globalcompressors]

There is not an internal overload on the Embraco compressor. If you have an open wind, on the run terminal, the bottom one, the compressor is a boat anchor. Time for a new one!

Eric

[boilerman]

thanks
any idea what it would cost to change out the compressor on the deck?
 

[globalcompressors]

Sure, give me a call. My toll free number is at the bottom. We have a couple of options
that we offer!

Thanks,

Eric

[johnieG]

There you go!  ( Thanks Eric)

[globalcompressors]

Welcome...