V-23 Restoration

[Steveo]

In addition to the broken latch spring, the slug rejector in my V-23 was missing.  My friend bent a sheet of brass into a chute, which works great in directing the coin into the retainer.  Now I need to deal with some rust on the galvanized basket.

Any suggestions?  I really don't want to pull the basket out of the machine.  Could I sand it in place and spray with a cold galvanizing paint? 

Thanks in advance guys and gals.

Steveo

[collecture]

I have used POR15 on liners with great success and it holds up well too. Since it is a self-leveling product, it fills in all the little pin holes nicely.

www.stoprust.net

[Chedki]

Is POR15 paintable ?

[coke_and_stuff]

Yes it is scuff it and paint it.

Joey