SMC Discussion Areas
November 23, 2024, 12:27:57 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > The Coin Return > Tutorials & Tips (Moderator: Jim) > dissassembling my vendorlator dual 27
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: dissassembling my vendorlator dual 27  (Read 10350 times)
0 Members and 1 Guest are viewing this topic.
spitzme
Newbie
*
Offline Offline

Posts: 30
« on: June 11, 2008, 04:19:50 am »
Hello All
I am having trouble getting the Coupling gear out of the door..  any ideas?
Thanks
Mike
 darn
Logged
spitzme
Newbie
*
Offline Offline

Posts: 30
« Reply #1 on: June 11, 2008, 07:05:24 am »
Here is a pic
Logged
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #2 on: June 11, 2008, 08:39:13 am »
Not certain, but there must be a a set screw or pin somewhere on the shaft that is holding it on?
Logged
Soda Machine Enthusiast since 1996!
spitzme
Newbie
*
Offline Offline

Posts: 30
« Reply #3 on: June 11, 2008, 09:01:21 am »
There appears to be a pin that goes through the shaft and the gear.  One side looks almost welded, while the other looks like the end of the pin.  Would you normally hammer that pin back out?  Do you think that it would damage the gear or shaft?
I looked at the manual and parts catalog and in the exploded diagram of parts, it shows a pin ... so maybe that is the answer..
What do you think?
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #4 on: June 11, 2008, 10:09:00 am »
There is a pin on the gear that you have pictured inside the coin door. Once you remove the pin and gear, pull on the coupler and shaft will slip through the main door.
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
spitzme
Newbie
*
Offline Offline

Posts: 30
« Reply #5 on: June 11, 2008, 10:59:21 am »
I have been knocking on that with a hammer and a punch and it is not moving... I am afraid that I am going to bend the shaft or gear..  I tried WD40... anything else to free up the pin?
-Mike
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #6 on: June 11, 2008, 11:36:28 am »
Quote from: spitze on June 11, 2008, 10:59:21 am
I have been knocking on that with a hammer and a punch and it is not moving... I am afraid that I am going to bend the shaft or gear..  I tried WD40... anything else to free up the pin?
-Mike

Try rotating the gear and go at it from the other side - I think it is a tapered pin
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!