let's get started (see the progress of restoraution)

[FouFF]

let's show you my progress of my restauration vendo56

I how it's post less with out pic  so I made a slideshow of all my picture taken for the reassemble.

http://s95.photobucket.com/albums/l160/FouFF/soda%20machine/disassemble/?action=view&current=856e8cdd.pbr

And I got a suprise to I will need you're advice for this I have a part from the dispenser bottle that is broken see picture I what to how is someone have this part ?





Next step is cleannig the brown sticky !%@$ and sandblast all the frame, door and panel.

I will need new rubber for both door and start to gat a place for chrome plating my handle and the bottle openner.

I what to remove the sticker to keep it and reinstall it when i'm finish my restoration




thanks to everyoen for takking the time to look at my progress

[FouFF]

Here is a link with all the picture in high resolution that I have taken last night

http://fouff.mine.nu:82/soda/vendo56.html

[FouFF]

he you how what I when for shopping this morning and there was a garage sale a my street and the man has on is table a coin mesh for amererican money and he was asking 20$ for the model s75-9800B so now my coin mesh is fix. 

I have taken both to make one hope it will work is anyone has a trick to si if it work before my machine is ready?

[FouFF]

Ok here are the news for today like you all now my machine is all in piece.

So the work for today was to remove all the caulk it's a pretty good job but I have to do it if I what to sandblast

[FouFF]

here is a link that I just made for the picture that I have take today

http://fouff.mine.nu:82/soda/vendo56_1.html

Enjoy

Good as bad comment are welcome

[FouFF]

ok so the door, some part of the vending door are 100% sandblast did not have the chance to go for my color code and by the end for the week-end I should everything sand blast

Is someone have a picture from the coin mesh door inside the is a sticker and can't not read clearly everything ( see picture)
thanks for the help

[collecture]

I can read most of it:

Do Not Block Ventilating Louvres
Plugged to Direct Outlet (No
    Long Extension Cords)
Evaporator Fan Runs
Precool Bottles Properly Placed
Compressor Area Clean
Compressor and Condenser Fan Runs
Bottle Size Adjustments ??
Empty Crown Box
Clean Crown Puller
Load Change Tube
?? OK
Light Bulbs OK
Temperature OK
Clearance OK
No Unusual Sounds
Vends OK with Coins
Clean the Coin Acceptor
Clean the Condenser

[FouFF]

Ok Good thanks here is the word that was missing 


Do Not Block Ventilating Louvres
Plugged to Direct Outlet (No
    Long Extension Cords)
Evaporator Fan Runs
Precool Bottles Properly Placed
Compressor Area Clean
Compressor and Condenser Fan Runs
Bottle Size Adjustments OK
Empty Crown Box
Clean Crown Puller
Load Change Tube
Drain OK
Light Bulbs OK
Temperature OK
Clearance OK
No Unusual Sounds
Vends OK with Coins
Clean the Coin Acceptor
Clean the Condenser

[collecture]

There is something after 'Bottle Size Adjustments...' that I can't make out too.

[FouFF]

There is something after 'Bottle Size Adjustments...' that I can't make out too.

Bottle Size Adjustments OK

thanks again