SMC Discussion Areas
October 11, 2024, 10:51:45 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Crank Handle Re-Assembly  (Read 20420 times)
0 Members and 1 Guest are viewing this topic.
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5876


#1 Soda Jerk!


WWW
« on: January 09, 2008, 08:19:21 pm »

The tutorial can assist you with re-assembling the crank handle, the internal cam, and spring.
Below is an exploded view of the parts from a manual.



Here are the parts ready for assembly:


Step 1.
Insert the Spring(#82) and Rests(#81 & #83) into the Handle(#78). Pictured, I am
using channel locks to compress the Spring slightly.


Step 1a.
Slightly insert the Cam(#79) as pictured, then place the Pawl(#80) between the Spring Rest
and the Cam as shown. Make sure the Pawl is almost all the in at the Spring end while the
Cam end of the Pawl should be half-way on the edge of the Cam (see photo).
Note: The Pawl may have slightly different bevels on the end towards the Cam. If so, make sure the larger bevel is upward or facing the top of the handle.


Step 2.
Now all you have to do is squeeze the Cam into the Handle. This forces the Pawl to compress
the Spring allowing the Pawl to fit into the Handle. See photos...


After fully inserting the Can into the Handle:


Step 3.
Place the Cover(#84) onto the Cam and fasten with three screws.
Place a small amount of white lithium lubricant on both sides of the cam. This will ease the counter-clock-wise rotation of the handle for opening coins doors.


Step 4.
Replace the three retaining screws for the cover.


That's It!
Logged

My six cents,

Jim

sodaman
25 Cent Member
****
Offline Offline

Posts: 299



« Reply #1 on: July 24, 2012, 10:25:06 am »

Great tutorial, the only problem is with my shaky hands, the spring goes flying out of the jaws of the channel locks, never to be seen again.  It really is a great presentation. 
Logged

VMC 81:RC, 7UP Pepsi
Jacobs: 26(4), 160, 35, 50, 56 
Quikold RC, Orange Crush, Barqs
General Vending Leader , Master & Midget(THE DALY 32)
American Vendor 124
Guiberson, DP 27 W/stand
VMC 33 7UP, Pepsi 
Mills 45, 47A, 120 W/bottle display
2 Delf Triples VMC 72
70+ soda Venders, 6 Stoner
cokecolaman
Soda Jerks
*****
Offline Offline

Posts: 986



« Reply #2 on: July 24, 2012, 12:21:58 pm »

 laugh lmfao....I wear eye protection now! I have had a spring come flying back at me, never to be seen again...I thought I was the only one!!!
Logged

VMC Coke 88 (nice original)
VMC Pepsi 81
VMC Orange Crush 81
VMC Squirt 81
VMC Dr. Pepper 81
VMC RC 81
VMC 7up 81 st
Vendo 44 original
Jacobs 56 Pepsi
Cavalier 33
BioScan
Newbie
*
Offline Offline

Posts: 12



« Reply #3 on: November 30, 2012, 10:13:43 am »

Great info thanks!!!
Logged

Vendo 81D
(2) Cav 51's
(2) Vendo 23 Deluxe
VMC 27A
VMC 27 Pepsi
VMC 139
SelVend S-47  7up
Vendo 39
Cav C-27
Cav C-55
Double Dot Pepsi Cooler
Vendo H63 Sundrop
Cavalier 64
Zerbie
10 Cent Member
***
Offline Offline

Posts: 187


Bob


« Reply #4 on: December 11, 2021, 06:18:26 pm »

Perfect- exactly what I needed to see! Thanks so much for putting this together and thanks Jared for pointing me to this!

My very first one - successfully put back together! It was still kind of a booger, (yes the spring and pins  went flying a couple of times - luckily I found them and had no injuries! Persistence paid off.

« Last Edit: December 12, 2021, 07:38:31 pm by Zerbie » Logged

Jacobs 56 Restored
Vendo 81D Restored
Vendo 81B - restoration in process
VMC Pepsi 81 - in line for restoration
cohammer
Soda Jerks
*****
Offline Offline

Posts: 957



« Reply #5 on: January 22, 2022, 12:30:05 am »

Great information! Can reinstall mine now .
Logged

Ideal 35 RC
v 23 deluxe
v 39
c 96
c 55 e
C 51 g
C 72
C96
V 27
Westinghouse JR ice chest
Westinghouse standard ice chest
Westinghouse master ice chest
early model Stoner jr.
Stoner theaters
Thanks Jeff
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!