SMC Discussion Areas
April 25, 2024, 12:56:00 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Refrigeration (Moderators: johnieG, Jim) > 81B compressor wiring
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 81B compressor wiring  (Read 4025 times)
0 Members and 1 Guest are viewing this topic.
USMC Vet
10 Cent Member
***
Offline Offline

Posts: 189
« on: October 20, 2007, 02:50:35 pm »
Are these 2 wires in the correct place ? I just bought the machine and I am trying to get the wiring lined out. If they are correct,what goes on the top left connection ? Thanks !
« Last Edit: October 20, 2007, 02:52:22 pm by USMC Vet » Logged
Tony
                                              
Vendo 81D - Being restored
Vendo Dr.Pepper Queen Anne - Very nice original
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: October 20, 2007, 02:55:05 pm »
The neutral wire from the overload protector.
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
USMC Vet
10 Cent Member
***
Offline Offline

Posts: 189
« Reply #2 on: October 20, 2007, 03:55:31 pm »
Do any other wires get connected to the terminals in the bottom photo ? There is 1 spade terminal that has nothing connected to it. Where does the other wire from the overload protector go ?
« Last Edit: October 20, 2007, 04:03:50 pm by USMC Vet » Logged
Tony
                                              
Vendo 81D - Being restored
Vendo Dr.Pepper Queen Anne - Very nice original
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #3 on: October 20, 2007, 06:40:22 pm »
the spade (male) connector on the small relay that has the other two wires going to the compressor pin terminals, should have the "hot" wire that comes from the thermostat. the other end of the overload protector should be connected to line neutral.
« Last Edit: October 20, 2007, 06:46:19 pm by johnieG » Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!