Pepsi vendorlator 3d-33

HI all, I was gonna start taking some of this machine apart....but it looks like the screws heads take a strange type of driver. Does anyone know what kind of driver is needed for these screws? Thanks! John

[Jim]

There're called "Clutch" and they come is different sizes too.

HI,I might have the plastic pepsi emblem you are looking for.It has a surface crack.I bougt this Pepsi machine for a buck at a rummage [and I was late]!!It turns out to be a coke machine,a Cavalier [no guts]not sure of the model yet.I'm new at this.Anyway one of the plastic emblems might be what you need.Next week I'm going to take the time to learn how to use my dig.camera and I'll post a pic.if you want.

[johnieG]

You can get the "Clutch" head driver bits at Sears Hardware
stores, you'll have to look for them as the general sales help
doesn't know what your talking about when it comes to this type of driver bit. mine came in an assortment of phillips & hex driver bits, (it had all three sizes too!)

Here's a picture of the embossed vendorlator logo at the bottom of the machine.  As you can see the paint is a bit off center which to me indicates an automated paint application.  This embossed logo might explain why it doesn't have the usual square VMC logo in the botoom middle area.  Am I correct in this thinking?

Thanks, Doug

[MoonDawg]

Wow this is a new one to me. I've never seen small embossed Vendolator letters before.  Now you have to peek inside to let us know if the top letters are raised or not.

Quote (jwd18 @ April 30 2003,11:15)

HI,I might have the plastic pepsi emblem you are looking for.It has a surface crack.I bougt this Pepsi machine for a buck at a rummage [and I was late]!!It turns out to be a coke machine,a Cavalier [no guts]not sure of the model yet.I'm new at this.Anyway one of the plastic emblems might be what you need.Next week I'm going to take the time to learn how to use my dig.camera and I'll post a pic.if you want.

Hi, I just ran across your append. Would you happen to still have the emblem? If so....did you still want to part with it? If so, let me know how much you'd want for it. Thanks! John