Need some parts

[coke_and_stuff]

I believe the racks are $150.00 it was a year ago so I may be wrong, as for the hard parts Ive bought main door liners from Home Arcade, and Funtronics both were the same and equally nice. I bought misc stuff from Soda Jerks and they were just as nice parts that were bought from the other two.

Joey

[Kilroy]

I'll also throw in kudos to Soda Jerks.
The service and quality of parts have been above my expectations

[MoonDawg]

     It is my understanding that all suppliers get their door liners from
the same manufacturer and no they do not fit right!
     I was finishing an 81 last week and discovered I was out of
liners. I had a homemade galvanived liner someone made and I
used it to hold the insulation in place until new ones arrived.
     The holes in the galvanized were lined up perfect with the
holes in the door. The new liner is basicly too small. It's like
the engineer lined the holes up on a flat plane, but when that
linear dimple was stamped all around, it brought all 4 sides inward
about 1/8 " See pic of new liner on top of galvanized.
      Until a new stamping is developed these will have to be
centered and new holes drilled in the door..
     

[Pat Pixley]

Well I'm still look for a rack and a Frankinsten coin mech housing.   
 As Far as Steve and Sharron there great people to work with
and they do run a first class operation , But not to take anything away from
Steve Ebner he also has a first class operation.

  But let me remind you I still need a rack and a coin mech housing 

Thanks guy's and gal's

 Bryan Thanks for the offer on the decal  but i'm set for now.
 Also I would like to thank Joey for the Vendo  shelf
That was a big  help.   

Pat

[sodaworks]

Steve and Sharon are great people to deal with. You can always count on fast and friendly service! Anytime I'm stumped on a machine issue I call Steve and he bails me out!