css-8-64 on Ebay. Whats a good offer?

[SquareTopCollector]

didnt get much done today. All the parts are intact and its set to vend at 35 cents. This machine was a great find since its smaller than my uss-8-64



I started to remove the wood grain sticker and look what I found.

someone fell asleep on the job back in 1975!

[loman4ec]

Its just black. i would use a spray bomb for that little pannel.

[SquareTopCollector]

yep I put several coats of flat and the last coat will be gloss

[loman4ec]

I can't remember but I think I might have a part that you might want. It is the the black piece that the coin bezel connects to. I think I have one that is polished aluminum. It looks alot better. i might even have a chrome coin bezel. I won't be back home untill August but if you remind me I will try and dig it out. If I can find them they are yours.

[SquareTopCollector]

thanks man!

[SquareTopCollector]

I am thinking about painting the black door red. What do you think?

I started to clean the inside of the machine today


I removed the compressor and took some pics of the wiring so I will know how to put it back together

[SquareTopCollector]

Gave the deck a good cleaning with a brillo pad.


The inside of the machine is in great condition. Too bad the outside needs a paint job



I removed the stack and gave it a good cleaning too. Thats all for now

[loman4ec]

I wouldnt paint the door liner red. It is thermal plastic and paint will not stick well. It is also is in a really humid and cold on the inside of the machine. With the door liner being flexable the paint will break off.

[SquareTopCollector]

oops, I was talking about this door. The one that was not painted all the way

[loman4ec]

Ok that makes more sense. It is a small pannel. try it the worst thing that can happen is you don't like it and paint it black again. I personally dont like all of the black on these machines. I think it will look alot better red. While you are at it I would paint the black piece behind the coin bezel white. It looks really good that way. I would also think about painting the sign frame and the black trim. You can also go to a local sign shop and have a new sign made for your machine. I think the white sign with red Drink Coca Cola looks alot better.