SMC Discussion Areas
November 23, 2024, 06:01:31 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Soda Machines, Coolers & Dispensers > Pre 60's Machines & Coolers (Moderators: johnieG, Jim) > V-56 In bits
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: V-56 In bits  (Read 4491 times)
0 Members and 1 Guest are viewing this topic.
davethebirdman
Soda Jerks
*****
Offline Offline

Posts: 3162
« on: September 16, 2006, 04:44:20 pm »
Okay Promise you won't laugh.

I'm putting my V-56 back together slowly but surely.
The one area I can't find a picture for, and I'm sure I took one was the inside of the coin door.

Could someone plse take a photo for me. Its a large coin door. I have alsorts of bits and pieces and I'm trying to work out where they go. Its 10.45pm and I'm going to bed with a bit of a headache.

Thanks

Dave
Logged
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768
« Reply #1 on: September 16, 2006, 09:49:03 pm »
I dont have any of my own machines but I stole this from colamachines.com. Do these help?
Logged
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768
« Reply #2 on: September 16, 2006, 09:51:32 pm »
oops here is a bigger one
Logged
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938
« Reply #3 on: September 16, 2006, 10:19:16 pm »
Dave,
Here is a start. Will need to take the coin mech off for anything better (no problem). Can you post a pic of the leftover parts and pieces? Might speed things up.

Creighton
Logged
davethebirdman
Soda Jerks
*****
Offline Offline

Posts: 3162
« Reply #4 on: September 17, 2006, 02:59:14 am »
Josh - Thanks for the pictures.

Jim & Creighton thanks for the PM's.

I should have explained myself a little better last night but after spending the day struggling with insulation and then breaker strips I was worn down and at my lowest eb.

The problem I cant seem to work out, even with the manual is the "Bent Coin Release." How do I get it to stay in the upright position.

This was the bit of the machine my dear old dad too to bits whilst I poped out for a tool and his skills with a Digital camera are not what they should have been.

At the mo my bent coin relase lever is sitting downwards. I need to be able to get some tauntness in it.

Hoped I explained that a bit better. Went to bed last night dreaming of vending racks and coin mechs.

Dave
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #5 on: September 17, 2006, 10:23:01 am »
Notice in Creighton's picture, there is a spring. One end of the spring attaches to a little nipple sticking out and the other end to the slide. The little nipple is actually part of the coin door itself and not part of the bezel or anything.
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938
« Reply #6 on: September 17, 2006, 11:32:28 am »
Dave,
Here is a close up.
Creighton
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227
« Reply #7 on: September 17, 2006, 11:35:28 am »
In addition to what Tom said, that little spring is difficult to install so use needle nose pliers and some patience.  '<img'>
Logged
Glen
davethebirdman
Soda Jerks
*****
Offline Offline

Posts: 3162
« Reply #8 on: September 17, 2006, 01:19:58 pm »
Cheers Guys.

Found the spring, not in the bag it should have been in.

Moondawg you're right. Shouted at te kids a few times kicked the dog but now its working.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!